TNY254G
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD, Gull Wing |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | TinySwitch® |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 4W |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 4W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 140μA |
| Control Features | EN |
| Topology | Flyback |
| Output Current-Max | 0.4A |
| Frequency - Switching | 44kHz |
| Supply Current-Max (Isup) | 0.38mA |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 68 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 3.73mm |
| Length | 9.59mm |
| Width | 6.35mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
TNY254G Overview
This ac to dc converter is embedded in package 8-SMD, Gull Wing .It is available in Tube AC/DC power converter.There is a mounting point for this AC/DC converter in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.This AC DC converter employs SWITCHING REGULATOR analog IC type.When the switching frequency reaches 44kHz , the process is complete.There are a total of 8 terminations.There are a total of 8 pins on the ac-dc converter.A member of the TinySwitch? manufacturer family, it has the following characteristics.There is 5.8V output voltage from this AC/DC converter.It is possible to supply the ac to dc inverter with a maximum current of 0.4A .This converter requires a minimum supply voltage of 85V volts.Across the converter, a maximum supply voltage of 265V may be applied.
TNY254G Features
Packaged with 8-SMD, Gull Wing
Switching Frequency at 44kHz
TNY254G Applications
There are a lot of Power Integrations TNY254G AC DC Converters applications.
- USB-PD 2.0
- Set-top boxes
- RCC SMPS
- Standby power
- Battery Chargers
- Z-Wave
- Adaptors for DSCs
- Tablets
- WiFi Wireless
- Standby power supplies for IR
