TNY255P
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | TinySwitch® |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 6.5W |
| Max Power Dissipation | 6.5W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 215μA |
| Control Features | EN |
| Topology | Flyback |
| Output Current-Max | 0.53A |
| Frequency - Switching | 130kHz |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 67 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 4.45mm |
| Length | 9.59mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
TNY255P Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm) contains the ac to dc converter.There is a AC/DC power converter of Tube available.A AC/DC converter of this type is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.When the switching frequency reaches 130kHz , the process is complete.There are a total of 8 terminations.In this ac/dc converter, there are 8 pins.A total of 8 pins are present on the ac-dc converter.This AC to DC converter belongs to the TinySwitch? manufacturer family.Its output voltage amounts to 5.8V .It is possible to supply the ac to dc inverter with a maximum current of 0.53A .In order for the converter to function properly, the supply voltage must be at least 85V .265V is the maximum supply voltage across the converter.
TNY255P Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 130kHz
With 8 pins
TNY255P Applications
There are a lot of Power Integrations TNY255P AC DC Converters applications.
- Standby Power Supplies
- Home Appliance Applications
- Standby power supplies for TV
- Automotive Infotainment
- USB-PD 2.0
- RCC SMPS
- Auxiliary Power Supplies
- Standby Power Supplies
- Networking
- Standby power supplies for VCR
