TNY263GN-TL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | TinySwitch®-II |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | PURE MATTE TIN |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 7.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8/7 |
| JESD-30 Code | R-PDSO-G7 |
| Output Voltage | 5.8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 200μA |
| Control Features | EN |
| Topology | Flyback |
| Output Current-Max | 0.4A |
| Frequency - Switching | 132kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 68 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 65% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 3.98mm |
| Length | 9.575mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TNY263GN-TL Overview
There is a ac to dc converter embedded in package 8-SMD (7 Leads), Gull Wing .The AC/DC power converter is available in Tape & Reel (TR) .Surface Mount is mounted in the way of this AC/DC converter.This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.When the switching frequency reaches 132kHz , the circuit is closed.There are a total of 7 terminations in it.The pins of the ac-dc converter count up to 8/7 .Suitable mounting is provided by Surface Mount .It belongs to a manufacturer family of TinySwitch?-II .The output voltage of the AC/DC converter is 5.8V .The maximum current that can be supplied to the ac to dc inverter is 0.4A .A minimum voltage of 85V is required across the converter.There is a maximum voltage supply across the converter of 265V volts.
TNY263GN-TL Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 132kHz
TNY263GN-TL Applications
There are a lot of Power Integrations TNY263GN-TL AC DC Converters applications.
- Power adapters for monitors
- Power tools
- IoT Applications
- Small off-line low voltage power supplies
- Standby Power Supply
- LED Driver
- Handheld/Battery-Powered Systems
- Auxiliary Power Supplies
- AC--DC Adapter
- DVD players
