TNY263PN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| Series | TinySwitch®-II |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | PURE MATTE TIN |
| Max Power Dissipation | 7.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Output Type | Adjustable |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 200μA |
| Control Features | EN |
| Topology | Flyback |
| Output Current-Max | 0.4A |
| Frequency - Switching | 132kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 68 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 65% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TNY263PN Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm), 7 Leads package.The AC/DC power converter Tube is available for this product.A AC/DC converter of this type is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.As a result, the switching frequency reaches 132kHz .As a result, it has a total of 7 terminations.Up to 8 pins are present on the ac-dc converter.The AC to DC converter belongs to the manufacturer family of TinySwitch?-II .AC to DC converter is necessary to run 1 outputs.It produces a voltage of 5.8V .A maximum current of 0.4A may be supplied to the ac to dc inverter.A voltage of 85V is the minimum supply voltage across the converter.Across the converter, the maximum supply voltage is 265V .It is configured to use Adjustable as an output.
TNY263PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 132kHz
Output Type : Adjustable
TNY263PN Applications
There are a lot of Power Integrations TNY263PN AC DC Converters applications.
- 3.3V power supplies
- AC--DC Adapter
- AC-DC Output Power Conversion Applications
- Adapter/Charger for Cordless Phones
- Replacements for bulky plug-in transformers
- Dimmers
- Adapters
- Automotive Clusters
- Remotely-controlled appliances
- Universal input AC/DC adapters (15W - 45W)
