TNY265PG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2001 |
| Series | TinySwitch®-II |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Power Rating | 11W |
| Max Power Dissipation | 11W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Output Current-Max | 0.44A |
| Frequency - Switching | 132kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 65% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TNY265PG Overview
It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .It is available in Tube AC/DC power converter.Through Hole is mounted in the way of this AC/DC converter.For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.In this AC to DC transformer, the switching frequency is 132kHz .As a result, it has a total of 7 terminations.The ac/dc converter has a total of 8 pins.In this ac-dc converter, there are 8 pins.A member of the TinySwitch?-II manufacturer family, it has the following characteristics.It is possible to supply the ac to dc inverter with a maximum current of 0.44A .SVHC for REACH can be found in the standard No SVHC .Input voltages under 265V can be used to power the AC to DC converter.Input voltages less than 85V volts can be used to operate the AC to DC inverter.A minimum voltage supply across the converter is 85V .There is 265V maximum supply voltage across the converter.Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 265V .
TNY265PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 132kHz
With 8 pins
TNY265PG Applications
There are a lot of Power Integrations TNY265PG AC DC Converters applications.
- Cleaners
- Power adapters for network devices
- Switching AC-DC Adapter
- Open Frame Switching Power Supply
- Portable Apparatus
- AC?DC USB chargers for Tablets
- Power tools fast chargers with trickle and on/off
- MP3
- Laptops
- Adapter/Charger for Cordless Phones
