banner_page

TNY265PN

7 TerminationsAC to DC power converterTinySwitch?-II Series 1 Outputs132kHz Min 85V VMax 265V V


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-TNY265PN
  • Package: 8-DIP (0.300, 7.62mm), 7 Leads
  • Datasheet: PDF
  • Stock: 845
  • Description: 7 TerminationsAC to DC power converterTinySwitch?-II Series 1 Outputs132kHz Min 85V VMax 265V V(Kg)

Details

Tags

Parameters
Number of Functions 1
Terminal Pitch 2.54mm
Pin Count 8
JESD-30 Code R-PDIP-T7
Number of Outputs 1
Output Voltage 5.8V
Output Type Adjustable
Analog IC - Other Type SWITCHING REGULATOR
Nominal Supply Current 245μA
Output Current 295mA
Output Power 7.5W
Control Features EN
Topology Flyback
Frequency - Switching 132kHz
Control Technique PULSE WIDTH MODULATION
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Short Circuit
Max Duty Cycle 68 %
Max Supply Voltage (AC) 265V
Duty Cycle 65%
Output Isolation Isolated
Voltage - Breakdown 700V
Min Supply Voltage (AC) 85V
Length 9.575mm
Width 7.62mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm), 7 Leads
Surface Mount NO
Operating Temperature -40°C~150°C TJ
Packaging Tube
Series TinySwitch®-II
JESD-609 Code e3
Pbfree Code yes
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 7
ECCN Code EAR99
Terminal Finish MATTE TIN
Max Power Dissipation 11W
Terminal Position DUAL

TNY265PN Overview


The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm), 7 Leads package.The ac dc converter is available in Tube case.Through Hole is mounted in the way of this AC/DC converter.This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.In this AC to DC transformer, the switching frequency is 132kHz .Total terminations are 7 .There are 8 pins on the ac-dc converter.It belongs to a manufacturer family of TinySwitch?-II .In this AC to DC transformer, there are 1 outputs to run.It has been set to 295mA for the output current.It produces a voltage of 5.8V .There is 7.5W output power generated by a coverter.The minimum supply voltage across the converter is 85V .A maximum voltage of 265V can be applied across the converter.It is configured with Adjustable as the output.

TNY265PN Features


Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 132kHz
Output Current at 295mA
Output Type : Adjustable

TNY265PN Applications


There are a lot of Power Integrations TNY265PN AC DC Converters applications.

  • Lighting controls
  • Power adapters for network devices
  • Standby Power for General Off-Line Applications
  • Low power ac?dc Adapters for Chargers
  • Industrial controls
  • 3.3V power supplies
  • Standby power supplies for VCR
  • Handheld/Battery-Powered Systems
  • Switching AC-DC Charger
  • Dimmers

Write a review

Note: HTML is not translated!
    Bad           Good