banner_page

TNY266GN

7 Terminations8 Pin AC to DC power converterTinySwitch?-II Series 1 OutputsMin 85V VMax 265V V


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-TNY266GN
  • Package: 8-SMD (7 Leads), Gull Wing
  • Datasheet: PDF
  • Stock: 814
  • Description: 7 Terminations8 Pin AC to DC power converterTinySwitch?-II Series 1 OutputsMin 85V VMax 265V V(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SMD (7 Leads), Gull Wing
Number of Pins 8
Operating Temperature -40°C~150°C TJ
Packaging Tube
Series TinySwitch®-II
JESD-609 Code e3
Pbfree Code yes
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 4 (72 Hours)
Number of Terminations 7
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Max Power Dissipation 15W
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch 2.54mm
Frequency 132kHz
Time@Peak Reflow Temperature-Max (s) 40
Pin Count 8/7
JESD-30 Code R-PDSO-G7
Number of Outputs 1
Output Voltage 700V
Output Type Adjustable
Analog IC - Other Type SWITCHING REGULATOR
Nominal Supply Current 265μA
Output Current 560mA
Output Power 9.5W
Control Features EN
Topology Flyback
Control Technique PULSE WIDTH MODULATION
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Short Circuit
Max Duty Cycle 68 %
Max Supply Voltage (AC) 265V
Drain to Source Resistance 14Ohm
Duty Cycle 65%
Output Isolation Isolated
Min Supply Voltage (AC) 85V
Length 9.575mm
Width 6.35mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

TNY266GN Overview


8-SMD (7 Leads), Gull Wing is the package in which the ac to dc converter is embedded.You can get it in AC/DC power converter Tube .This AC/DC converter is mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.Total terminations are 7 .In this ac/dc converter, there are 8 pins.A total of 8/7 pins are present on the ac-dc converter.The ac dc converters are suitable for mounting by Surface Mount .It belongs to a manufacturer family of TinySwitch?-II .There are 1 outputs to be run.560mA is set as the output current.Its output voltage is700V .High efficiency can be achieved when AC to DC converters frequency is set to 132kHz .REACH SVHC standard can be found at No SVHC .The output power of a coverter is assumed to be 9.5W .A minimum voltage of 85V is required across the converter.A maximum voltage of 265V can be applied across the converter.There is a Adjustable output configured.

TNY266GN Features


Packaged with 8-SMD (7 Leads), Gull Wing
With 8 pins
Output Current at 560mA
Output Type : Adjustable

TNY266GN Applications


There are a lot of Power Integrations TNY266GN AC DC Converters applications.

  • Utility meters
  • Standby Power Supplies
  • 3.3V power supplies
  • AC?DC USB chargers for Cameras
  • Adaptors for DSCs
  • Off--line Battery Charger
  • Low power ac?dc Adapters for Chargers
  • AC?DC USB chargers for Tablets
  • Smartphones
  • Laptops and personal digital assistants

Write a review

Note: HTML is not translated!
    Bad           Good