TNY267GN
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | TinySwitch®-II |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 19W |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 132kHz |
| Pin Count | 8/7 |
| JESD-30 Code | R-PDSO-G7 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Output Type | Adjustable |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 315μA |
| Output Current | 720mA |
| Output Power | 12W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 68 % |
| Max Supply Voltage (AC) | 265V |
| Drain to Source Resistance | 7.8Ohm |
| Duty Cycle | 65% |
| Output Isolation | Isolated |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TNY267GN Overview
There is a ac to dc converter embedded in package 8-SMD (7 Leads), Gull Wing .In Tube AC/DC power converter, it is available.In this case, the AC/DC converter is mounted in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.As a result, it has had 7 terminations.It contains 8 pins.Up to 8/7 pins are present on the ac-dc converter.Currently, it is acdc converter of the manufacturer family of TinySwitch?-II .There are 1 outputs to be run.We have set the output current to 720mA .There is 700V voltage output from it.This power AC DC is capable of reaching high efficiencies when operating at a frequency of 132kHz .In the following link, you will find the REACH SVHC standard: No SVHC .Input voltage for the AC to DC converter is available under 265V .In the AC to DC transformer of a coverter, the output power is 12W .An input voltage of less than 85V volts can be used with the AC to DC inverter.A voltage of 85V is the minimum supply voltage across the converter.The maximum supply voltage across the converter is 265V .AC to DC power converters should be able to accept input voltages (AC) below 265V .This output uses Adjustable .
TNY267GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
With 8 pins
Output Current at 720mA
Output Type : Adjustable
TNY267GN Applications
There are a lot of Power Integrations TNY267GN AC DC Converters applications.
- MP3
- PDAs
- IoT Applications
- Home Appliance Applications
- Portable audio
- Digital cameras
- Standby Power for General Off-Line Applications
- Battery Chargers
- White goods
- Battery chargers for cordless
