Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SMD (7 Leads), Gull Wing |
Number of Pins |
7 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2005 |
Series |
TinySwitch®-II |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
4 (72 Hours) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
19W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Pin Count |
8/7 |
Number of Outputs |
1 |
Output Voltage |
5V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
315μA |
Output Current |
500mA |
Output Power |
12W |
Control Features |
EN |
Topology |
Flyback |
Frequency - Switching |
132kHz |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Temperature, Short Circuit |
Max Duty Cycle |
68 % |
Max Supply Voltage (AC) |
265V |
Duty Cycle |
65% |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
Min Supply Voltage (AC) |
85V |
Height Seated (Max) |
3.98mm |
Width |
6.35mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
TNY267GN-TL Overview
There is a ac to dc converter embedded in package 8-SMD (7 Leads), Gull Wing .The AC/DC power converter type is Tape & Reel (TR) .There is a mounting point for this AC/DC converter in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.As a result, the switching frequency reaches 132kHz .In total, it has 7 terminations.In this ac/dc converter, there are 7 pins.There are 8/7 pins on the ac-dc converter.It are possible to mount thare ac dc converters by Surface Mount .It is a member of TinySwitch?-II manufacturer family.Running 1 outputs is available.In this AC to DC transformer, the output current is set to 500mA .There is 5V output voltage from this AC/DC converter.12W is the output power of a coverter.The minimum supply voltage across the converter is 85V .There is a maximum supply voltage of 265V across the converter.
TNY267GN-TL Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 132kHz
With 7 pins
Output Current at 500mA
TNY267GN-TL Applications
There are a lot of Power Integrations TNY267GN-TL AC DC Converters applications.
- AC--DC Adapter
- IoT Applications
- Battery chargers for cordless
- Power adapters for network devices
- Standby power supplies for VCR
- LED Driver
- Charger
- Auxiliary Power Supply
- Off--line Battery Charger
- Adapter for ADSL