Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm), 7 Leads |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
TinySwitch®-II |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Terminal Finish |
MATTE TIN |
Max Power Dissipation |
19W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Pin Count |
8 |
JESD-30 Code |
R-PDIP-T7 |
Number of Outputs |
1 |
Output Voltage |
5.8V |
Output Type |
Adjustable |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
315μA |
Output Current |
481mA |
Output Power |
12W |
Control Features |
EN |
Topology |
Flyback |
Frequency - Switching |
132kHz |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Temperature, Short Circuit |
Max Duty Cycle |
68 % |
Max Supply Voltage (AC) |
265V |
Duty Cycle |
65% |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
Min Supply Voltage (AC) |
85V |
Length |
9.575mm |
Width |
7.62mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
TNY267PN Overview
In the package 8-DIP (0.300, 7.62mm), 7 Leads , the ac to dc converter is embedded.Tube case is available for the ac dc converter.This AC/DC converter is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .As a result, the switching frequency reaches 132kHz .There have been 7 terminations of this program.There are a total of 8 pins on the ac-dc converter.It is suitable for mounting by Through Hole .It belongs to the manufacturer family of TinySwitch?-II .There are 1 outputs to run.We have set the output current to 481mA .In this AC to DC transformer, the output voltage is 5.8V .It is assumed that a coverter generates 12W as its output power.In order for the converter to function properly, the supply voltage must be at least 85V .There is a maximum supply voltage of 265V across the converter.The output it is configured with uses Adjustable .
TNY267PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 132kHz
Output Current at 481mA
Output Type : Adjustable
TNY267PN Applications
There are a lot of Power Integrations TNY267PN AC DC Converters applications.
- Small off-line low voltage power supplies
- Power tools fast chargers with trickle and on/off
- Standby Power Supplies
- Automotive Telematics
- Auxiliary Power Supply
- Remotely-controlled appliances
- Set Top Boxes (STB)
- Cleaners
- Standby power supplies for VCR
- Power adapters for monitors