banner_page

TNY268GN

7 Terminations8 Pin AC to DC power converterTinySwitch?-II Series 1 OutputsMin 85V VMax 265V V


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-TNY268GN
  • Package: 8-SMD (7 Leads), Gull Wing
  • Datasheet: PDF
  • Stock: 333
  • Description: 7 Terminations8 Pin AC to DC power converterTinySwitch?-II Series 1 OutputsMin 85V VMax 265V V(Kg)

Details

Tags

Parameters
Control Features EN
Topology Flyback
Min Input Voltage 85V
Max Input Voltage 265V
Control Technique PULSE WIDTH MODULATION
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Short Circuit
Max Duty Cycle 68 %
Max Supply Voltage (AC) 265V
Drain to Source Resistance 5.2Ohm
Duty Cycle 65%
Output Isolation Isolated
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Min Supply Voltage (AC) 85V
Length 9.575mm
Width 6.35mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free
Mounting Type Surface Mount
Package / Case 8-SMD (7 Leads), Gull Wing
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~150°C TJ
Packaging Tube
Series TinySwitch®-II
JESD-609 Code e3
Pbfree Code yes
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 4 (72 Hours)
Number of Terminations 7
ECCN Code EAR99
Terminal Finish MATTE TIN
Power Rating 23W
Max Power Dissipation 23W
Terminal Position DUAL
Number of Functions 1
Terminal Pitch 2.54mm
Frequency 132kHz
Pin Count 8/7
JESD-30 Code R-PDSO-G7
Number of Outputs 1
Output Voltage 700V
Output Type Adjustable
Analog IC - Other Type SWITCHING REGULATOR
Operating Supply Current 380μA
Output Current 880mA
Output Power 15W

TNY268GN Overview


It is embedded in package 8-SMD (7 Leads), Gull Wing .In Tube case, the ac dc converter is available.This AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.As a result, it has had 7 terminations.It contains 8 pins.The pins of the ac-dc converter count up to 8/7 .It belongs to the family of TinySwitch?-II manufacturers.The number of outputs to run is 1 .It has been set to 880mA for the output current.The output voltage of the AC/DC converter is 700V .This power AC DC is capable of reaching high efficiencies when operating at a frequency of 132kHz .Here is the standard for REACH SVHC : No SVHC .Input voltages under 265V can be used to power the AC to DC converter.In the AC to DC transformer of a coverter, the output power generated is 15W .A voltage of less than 85V V can be used with the AC to DC inverter.This converter requires a minimum supply voltage of 85V volts.This converter can operate at a maximum supply voltage of 265V .The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .This output uses Adjustable .

TNY268GN Features


Packaged with 8-SMD (7 Leads), Gull Wing
With 8 pins
Output Current at 880mA
Output Type : Adjustable

TNY268GN Applications


There are a lot of Power Integrations TNY268GN AC DC Converters applications.

  • Tablets
  • Consumer electronics
  • White goods
  • AC/DC LED Driver applications
  • Utility meters
  • PDAs
  • Rice Cooker
  • Smartphones
  • Shaver Charger
  • Networking

Write a review

Note: HTML is not translated!
    Bad           Good