Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SMD (7 Leads), Gull Wing |
Number of Pins |
8 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
TinySwitch®-III |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
4 (72 Hours) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Power Rating |
5W |
Max Power Dissipation |
11W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Pin Count |
8/7 |
JESD-30 Code |
R-PDSO-G7 |
Number of Outputs |
1 |
Output Voltage |
12V |
Input Voltage-Nom |
2.2V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
275μA |
Output Power |
11W |
Control Features |
EN |
Topology |
Flyback |
Output Current-Max |
0.273A |
Frequency - Switching |
132kHz |
Input Voltage (Max) |
2.6V |
Control Technique |
PULSE WIDTH MODULATION |
Supply Current-Max (Isup) |
0.36mA |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
Max Duty Cycle |
65 % |
Max Supply Voltage (AC) |
265V |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
Min Supply Voltage (AC) |
85V |
Length |
9.575mm |
Width |
6.35mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
TNY274GN-TL Overview
In the 8-SMD (7 Leads), Gull Wing package, the ac to dc converter is embedded.It is available in Tape & Reel (TR) AC/DC power converter.There is a mounting point for this AC/DC converter in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.This AC DC converter employs SWITCHING REGULATOR analog IC type.The switching frequency reaches 132kHz .Total terminations are 7 .On this ac/dc converter, there are 8 pins.Up to 8/7 pins are present on the ac-dc converter.There are no problem mounting the ac dc converters by Surface Mount .This AC to DC converter belongs to the TinySwitch?-III manufacturer family.AC to DC converter is necessary to run 1 outputs.In this AC to DC transformer, the output voltage is 12V .Based on a unique technique, it is possible to ensure input voltages with the maximal value of 2.6V .The maximum current that can be supplied to the ac to dc inverter is 0.273A .Coverters generate 11W in terms of output power.This converter requires a minimum supply voltage of 85V volts.265V is the maximum supply voltage across the converter.
TNY274GN-TL Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 132kHz
With 8 pins
TNY274GN-TL Applications
There are a lot of Power Integrations TNY274GN-TL AC DC Converters applications.
- Adaptors for Portable Media Player
- 3.3V power supplies
- LED lights
- USB-PD 2.0
- Battery Chargers
- AC?DC USB chargers for Cameras
- Humidifier
- Standby power supplies for TV
- ZigBee
- Replaces linear transformers