Parameters |
Series |
TinySwitch®-III |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
4 (72 Hours) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Terminal Finish |
PURE MATTE TIN |
Power Rating |
15W |
Max Power Dissipation |
15W |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
250 |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Frequency |
132kHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Pin Count |
8/7 |
JESD-30 Code |
R-PDSO-G7 |
Number of Outputs |
1 |
Output Voltage |
700V |
Output Type |
Adjustable |
Input Voltage-Nom |
2.2V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
295μA |
Output Power |
11.5W |
Control Features |
EN |
Topology |
Flyback |
Min Input Voltage |
85V |
Output Current-Max |
0.3A |
Max Input Voltage |
265V |
Control Technique |
PULSE WIDTH MODULATION |
Supply Current-Max (Isup) |
0.4mA |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
Max Duty Cycle |
65 % |
Max Supply Voltage (AC) |
265V |
Duty Cycle |
65% |
Output Isolation |
Isolated |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Min Supply Voltage (AC) |
85V |
Height |
3.68mm |
Length |
9.83mm |
Width |
6.6mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SMD (7 Leads), Gull Wing |
Number of Pins |
8 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
TNY275GN Overview
In the package 8-SMD (7 Leads), Gull Wing , the ac to dc converter is embedded.Tube case is available for the ac dc converter.There is a mounting point for this AC/DC converter in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.A total of 7 terminations have been recorded.In this ac/dc converter, there are 8 pins.There are 8/7 pins on the ac-dc converter.The ac dc converters are suitable to mount by Surface Mount .It belongs to the manufacturer family of TinySwitch?-III .Running 1 outputs is available.There is 700V voltage output from it.AC to DC converter reaches high efficiency when operated at a frequency of 132kHz .In theory, the maximum current that can be supplied to the ac to dc inverter is 0.3A .You can read the standard of REACH SVHC : No SVHC .It is available to power the AC to DC converter input voltage under 265V .It is assumed that a coverter generates 11.5W as its output power.If the input voltage is less than 85V V, the AC to DC inverter can be used.A minimum voltage supply across the converter is 85V .Across the converter, a maximum supply voltage of 265V may be applied.A AC to DC power converter's input voltage (AC) should not exceed 265V .It is configured to output Adjustable .
TNY275GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
With 8 pins
Output Type : Adjustable
TNY275GN Applications
There are a lot of Power Integrations TNY275GN AC DC Converters applications.
- AC/DC Adaptors/Chargers for PDAs
- Universal input AC/DC adapters (15W - 45W)
- Laptops
- RCC SMPS
- Charger
- Power adapters for monitors
- Adaptors for Portable Media Player
- USB-PD 2.0
- Adaptors for DSCs
- Consumer electronics