Parameters |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Min Supply Voltage (AC) |
85V |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Factory Lead Time |
1 Week |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm), 7 Leads |
Surface Mount |
NO |
Number of Pins |
7 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2009 |
Series |
TinySwitch®-III |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Power Rating |
11.5W |
Max Power Dissipation |
15W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Pin Count |
8 |
Number of Outputs |
1 |
Output Voltage |
12V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
295μA |
Output Current |
1A |
Output Power |
11.5W |
Control Features |
EN |
Topology |
Flyback |
Min Input Voltage |
85V |
Frequency - Switching |
132kHz |
Max Input Voltage |
265V |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
Max Duty Cycle |
65 % |
Max Supply Voltage (AC) |
265V |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
TNY275PG Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm), 7 Leads package.The AC/DC power converter type is Tube .This AC/DC converter is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.Analog IC type SWITCHING REGULATOR is utilized in this AC DC converter.At this point, the switching frequency reaches 132kHz .As a result, it has had 7 terminations.A ac/dc converter with 7 pins is available.Up to 8 pins are present on the ac-dc converter.It belongs to a manufacturer family of TinySwitch?-III .In this AC to DC transformer, there are 1 outputs to run.We have set the output current to 1A .Its output voltage is12V .You may read the REACH SVHC standard at No SVHC .Input voltage for the AC to DC converter is available under 265V .In the AC to DC transformer of a coverter, the output power is 11.5W .If the input voltage is less than 85V V, the AC to DC inverter can be used.In order for the converter to function properly, the supply voltage must be at least 85V .Across the converter, the maximum supply voltage is 265V .Input voltage (AC) should be below 265V .
TNY275PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 132kHz
With 7 pins
Output Current at 1A
TNY275PG Applications
There are a lot of Power Integrations TNY275PG AC DC Converters applications.
- Power tools
- Open Frame Switching Power Supply
- Standby Power Supply
- Automotive Clusters
- Shaver Charger
- 3.3V power supplies
- Industrial controls
- Standby power supplies for VCR
- AC?DC USB chargers for Cameras
- Standby power