TNY276GN
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8/7 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | Adjustable |
| Input Voltage-Nom | 2.2V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 310μA |
| Output Power | 15W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Output Current-Max | 0.382A |
| Frequency - Switching | 132kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.43mA |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 65 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | TinySwitch®-III |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Power Rating | 15W |
| Max Power Dissipation | 19W |
TNY276GN Overview
It is embedded in package 8-SMD (7 Leads), Gull Wing .The AC/DC power converter is available in Tube .The AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.Analog IC type SWITCHING REGULATOR is utilized in this AC DC converter.When the switching frequency reaches 132kHz , the process is complete.As a result, it has had 7 terminations.There are 7 pins on the ac/dc converter.The pins of the ac-dc converter total to 8/7 .It is suitable for mounting by Surface Mount .A member of the TinySwitch?-III manufacturer family, it has the following characteristics.There are 1 outputs to be processed.The voltage output by this AC/DC converter is 12V .Currently, the maximum current that the ac to dc inverter can take is 0.382A .You can read the standard for REACH SVHC at: No SVHC .Under 265V , it is possible to power the AC to DC converter's input voltage.It is assumed that a coverter generates 15W as its output power.It is possible to use the AC to DC inverter with an input voltage less than 85V V.The minimum supply voltage across the converter is 85V .A maximum voltage of 265V can be applied across the converter.The AC to DC power converter's input voltage (AC) should be below 265V .It uses Adjustable as an output.
TNY276GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 132kHz
With 7 pins
Output Type : Adjustable
TNY276GN Applications
There are a lot of Power Integrations TNY276GN AC DC Converters applications.
- Chargers for cell/cordless phones
- Adapters
- Adapter/Charger for Cell
- Wireless System
- AC?DC USB chargers for Cameras
- Auxiliary Power Supply
- Laptops
- Standby power supplies for IR
- Appliance Power Supplies
- Cellular phone chargers
