TNY276GN-TL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | TinySwitch®-III |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8/7 |
| JESD-30 Code | R-PDSO-G7 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Input Voltage-Nom | 2.2V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 310μA |
| Output Power | 19W |
| Control Features | EN |
| Topology | Flyback |
| Output Current-Max | 0.382A |
| Frequency - Switching | 132kHz |
| Input Voltage (Max) | 2.6V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.43mA |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 65 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 3.98mm |
| Length | 9.575mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TNY276GN-TL Overview
There is a ac to dc converter embedded in package 8-SMD (7 Leads), Gull Wing .There is a AC/DC power converter of Tape & Reel (TR) available.This AC/DC converter is mounted in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.As a result, the switching frequency reaches 132kHz .There are a total of 7 terminations.The pins of the ac-dc converter total to 8/7 .A member of the TinySwitch?-III manufacturer family, it has the following characteristics.Running 1 outputs is available.There is 12V voltage output from it.On the basis of a unique technique, the input voltage can be ensured to be 2.6V .In theory, the maximum current that can be supplied to the ac to dc inverter is 0.382A .In the AC to DC transformer of a coverter, the output power is 19W .In order for the converter to function properly, the supply voltage must be at least 85V .There is a maximum supply voltage of 265V across the converter.
TNY276GN-TL Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 132kHz
TNY276GN-TL Applications
There are a lot of Power Integrations TNY276GN-TL AC DC Converters applications.
- WiFi Wireless
- SMPS house keeping power supplies
- PDAs
- AC?DC USB chargers for Cell Phones
- Automotive Telematics
- Off--line Battery Charger
- Open Frame Switching Power Supply
- AC/DC LED Driver applications
- Power Adaptors
- AC/DC Adaptors/Chargers for Cordless Phone
