Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm), 7 Leads |
Number of Pins |
7 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2006 |
Series |
TinySwitch®-III |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Power Rating |
15W |
Max Power Dissipation |
19W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Pin Count |
8 |
Number of Outputs |
1 |
Output Voltage |
12V |
Output Type |
Adjustable |
Input Voltage-Nom |
2.2V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
310μA |
Output Power |
15W |
Control Features |
EN |
Topology |
Flyback |
Min Input Voltage |
85V |
Frequency - Switching |
132kHz |
Max Input Voltage |
265V |
Control Technique |
PULSE WIDTH MODULATION |
Supply Current-Max (Isup) |
0.43mA |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
Max Duty Cycle |
65 % |
Max Supply Voltage (AC) |
265V |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Min Supply Voltage (AC) |
85V |
Height |
3.68mm |
Length |
9.83mm |
Width |
6.6mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
TNY276PN Overview
It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .The AC/DC power converter is available in Tube .As you can see, this AC/DC converter is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .In this AC DC converter, the analog IC type is SWITCHING REGULATOR .When the switching frequency reaches 132kHz , the process is complete.As a result, it has a total of 7 terminations.In this ac/dc converter, there are 7 pins.There are a total of 8 pins on the ac-dc converter.The ac dc converters is suitable for mounting by Through Hole .Currently, it is acdc converter of the manufacturer family of TinySwitch?-III .Running 1 outputs is available.Its output voltage is12V .You can read the standard of REACH SVHC : No SVHC .The AC to DC converter can be powered under 265V voltage.In the AC to DC transformer of a coverter, the output power is 15W .An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.A voltage of 85V is the minimum supply voltage across the converter.There is 265V maximum supply voltage across the converter.An input voltage (AC) should be applied to the AC to DC power converter that falls below 265V volts.Adjustable is the output it is configured with.
TNY276PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 132kHz
With 7 pins
Output Type : Adjustable
TNY276PN Applications
There are a lot of Power Integrations TNY276PN AC DC Converters applications.
- Battery chargers for media tablets
- Rice Cooker
- Adapter for ADSL
- AC/DC Adaptors/Chargers for PDAs
- Standby power supplies for IR
- Standby Power for General Off-Line Applications
- Lighting controls
- RCC SMPS
- Linear Adapter Replacements
- WiFi Wireless