banner_page

TNY277GN

7 Terminations7 Pin AC to DC power converterTinySwitch?-III Series 1 Outputs132kHz Min 85V VMax 265V V


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-TNY277GN
  • Package: 8-SMD (7 Leads), Gull Wing
  • Datasheet: PDF
  • Stock: 880
  • Description: 7 Terminations7 Pin AC to DC power converterTinySwitch?-III Series 1 Outputs132kHz Min 85V VMax 265V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SMD (7 Leads), Gull Wing
Number of Pins 7
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2006
Series TinySwitch®-III
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 4 (72 Hours)
Number of Terminations 7
ECCN Code EAR99
Terminal Finish PURE MATTE TIN
Power Rating 18W
Max Power Dissipation 23.5W
Terminal Position DUAL
Peak Reflow Temperature (Cel) 250
Number of Functions 1
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) 40
Pin Count 8/7
Number of Outputs 1
Output Voltage 12V
Output Type Adjustable
Input Voltage-Nom 2.2V
Analog IC - Other Type SWITCHING REGULATOR
Operating Supply Current 365μA
Output Power 18W
Control Features EN
Topology Flyback
Min Input Voltage 85V
Frequency - Switching 132kHz
Max Input Voltage 265V
Control Technique PULSE WIDTH MODULATION
Supply Current-Max (Isup) 0.46mA
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 65 %
Max Supply Voltage (AC) 265V
Output Isolation Isolated
Voltage - Breakdown 700V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Min Supply Voltage (AC) 85V
Height 3.68mm
Length 9.83mm
Width 6.6mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

TNY277GN Overview


The ac to dc converter is embedded in 8-SMD (7 Leads), Gull Wing package.It is available in Tube AC/DC power converter.As you can see, this AC/DC converter is mounted in the way of Surface Mount .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.Switching frequency reaches 132kHz Hz.In total, it has 7 terminations.Approximately 7 pins are present on the ac/dc converter.The pins of the ac-dc converter total to 8/7 .The ac dc converters are suitable for mounting by Surface Mount .The product is acdc converter of the TinySwitch?-III manufacturer family.Running 1 outputs is available.In this AC to DC transformer, the output voltage is 12V .It is possible to read the REACH SVHC standard at: No SVHC .Under 265V , it is possible to power the AC to DC converter's input voltage.In the AC to DC transformer of a coverter, the output power generated is 18W .If the input voltage is less than 85V V, the AC to DC inverter can be used.There should be no less than 85V voltage across the converter.There is 265V maximum supply voltage across the converter.Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 265V .The output it is configured with uses Adjustable .

TNY277GN Features


Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 132kHz
With 7 pins
Output Type : Adjustable

TNY277GN Applications


There are a lot of Power Integrations TNY277GN AC DC Converters applications.

  • Standby power
  • Z-Wave
  • Adapter/Charger for Cordless Phones
  • AC/DC Adaptors/Chargers for PDAs
  • Universal Off-Line Power Supplies
  • Battery chargers for cordless
  • MP3
  • Low-Voltage I/O System Power
  • Switching AC-DC Charger
  • Small off-line low voltage power supplies

Write a review

Note: HTML is not translated!
    Bad           Good