TNY277GN-TL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | TinySwitch®-III |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 23.5W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8/7 |
| JESD-30 Code | R-PDSO-G7 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Input Voltage-Nom | 2.2V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 365μA |
| Output Power | 23.5W |
| Control Features | EN |
| Topology | Flyback |
| Frequency - Switching | 132kHz |
| Input Voltage (Max) | 2.6V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.46mA |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 65 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 3.98mm |
| Length | 9.575mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TNY277GN-TL Overview
This ac to dc converter is embedded in package 8-SMD (7 Leads), Gull Wing .The AC/DC power converter Tape & Reel (TR) is available for this product.This AC/DC converter is mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.When the switching frequency reaches 132kHz , the circuit is closed.There are a total of 7 terminations.The pins of the ac-dc converter total to 8/7 .Suitable mounting is provided by Surface Mount .It belongs to the manufacturer family of TinySwitch?-III .In this AC to DC transformer, there are 1 outputs to run.There is 12V voltage output from it.The input voltage with the maximal value of 2.6V can be ensured on the basis of unique technique.The output power of a coverter generates 23.5W .There is a minimum supply voltage of 85V across the converter.Across the converter, the maximum supply voltage is 265V .
TNY277GN-TL Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 132kHz
TNY277GN-TL Applications
There are a lot of Power Integrations TNY277GN-TL AC DC Converters applications.
- AC/DC Adaptors/Chargers for E-books
- WiFi Wireless
- Standby Power for General Off-Line Applications
- Low power ac?dc Adapters for Chargers
- Laptops and personal digital assistants
- Set -Top Box (STB) Power Supply
- Battery Chargers
- Wireless System
- Off--line Battery Charger
- Small off-line low voltage power supplies
