Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm), 7 Leads |
Number of Pins |
7 |
Weight |
2.26799g |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2006 |
Series |
TinySwitch®-III |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Power Rating |
18W |
Max Power Dissipation |
23.5W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Pin Count |
8 |
Number of Outputs |
1 |
Output Voltage |
12V |
Output Type |
Adjustable |
Input Voltage-Nom |
2.2V |
Max Supply Voltage |
265V |
Min Supply Voltage |
100V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Operating Supply Current |
365μA |
Nominal Supply Current |
365μA |
Output Power |
18W |
Control Features |
EN |
Topology |
Flyback |
Min Input Voltage |
85V |
Frequency - Switching |
132kHz |
Max Input Voltage |
265V |
Control Technique |
PULSE WIDTH MODULATION |
Supply Current-Max (Isup) |
0.46mA |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
Max Duty Cycle |
65 % |
Max Junction Temperature (Tj) |
150°C |
Max Supply Voltage (AC) |
265V |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Min Supply Voltage (AC) |
85V |
Height |
4.06mm |
Length |
9.83mm |
Width |
6.6mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
TNY277PN Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.In Tube case, the ac dc converter is available.A AC/DC converter of this type is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.This AC DC converter employs SWITCHING REGULATOR analog IC type.At this point, the switching frequency reaches 132kHz .In total, there are 7 terminations.A ac/dc converter with 7 pins is available.The pins of the ac-dc converter count up to 8 .Suitable mounting is provided by Through Hole .It belongs to the manufacturer family of TinySwitch?-III .A total of 1 outputs are available for processing.This AC/DC converter produces a voltage of 12V as its output.This is the standard of REACH SVHC : No SVHC .The AC to DC converter can be powered from the input voltage under 265V .It is assumed that a coverter generates 18W as its output power.An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.The minimum supply voltage across the converter is 85V .265V is the maximum supply voltage across the converter.AC to DC power converters should be able to accept input voltages (AC) below 265V .The AC to DC power supply can operate with a minimum supply voltage of 100V volts.There is a Adjustable output configured.
TNY277PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 132kHz
With 7 pins
Output Type : Adjustable
TNY277PN Applications
There are a lot of Power Integrations TNY277PN AC DC Converters applications.
- Handheld/Battery-Powered Systems
- Standby Power Supplies
- Home Appliance Applications
- Set Top Boxes (STB)
- Standby power supplies for TV
- Power Adaptors
- Adapter/Charger for Cordless Phones
- Adapters for Handheld Electronics
- IoT Applications
- AC/DC LED Driver applications