TNY278GN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Number of Pins | 8 |
| Manufacturer Package Identifier | SMD-8C |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | TinySwitch®-III |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Power Rating | 28W |
| Max Power Dissipation | 28W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 132kHz |
| Pin Count | 8/7 |
| JESD-30 Code | R-PDSO-G7 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Output Type | Adjustable |
| Input Voltage-Nom | 2.2V |
| Voltage | 85V |
| Max Supply Voltage | 700V |
| Min Supply Voltage | 50V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 445μA |
| Nominal Supply Current | 445μA |
| Output Power | 21.5W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Output Current-Max | 0.6A |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.54mA |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 65 % |
| Max Junction Temperature (Tj) | 150°C |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.98mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TNY278GN Overview
The ac to dc converter is embedded in 8-SMD (7 Leads), Gull Wing package.The AC/DC power converter Tube is available for this product.It is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.As a result, it has a total of 7 terminations.The ac/dc converter has 8 pins.There are 8/7 pins in the ac-dc converter.The ac dc converters is suitable for mounting by Surface Mount .A member of the TinySwitch?-III manufacturer family, it has the following characteristics.In this AC to DC transformer, there are 1 outputs to run.In this AC to DC transformer, the output voltage is 700V .This power AC DC is capable of reaching high efficiency when operating at a frequency of 132kHz .A maximum current of 0.6A may be supplied to the ac to dc inverter.You may read the REACH SVHC standard at No SVHC .Under 265V , it is possible to power the AC to DC converter's input voltage.The output power of a coverter generates 21.5W .An input voltage of less than 85V V is required to operate the AC to DC inverter.A voltage of 85V is the minimum supply voltage across the converter.Across the converter, the maximum supply voltage is 265V .There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .AC to DC converter can work with the minimum supply voltage of 50V .It is configured with a Adjustable output.
TNY278GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
With 8 pins
Output Type : Adjustable
TNY278GN Applications
There are a lot of Power Integrations TNY278GN AC DC Converters applications.
- Standby power
- Standby power supplies for TV
- MP3
- AC--DC Adapter
- Adapters
- Standby power supplies for IR
- Standby and Auxiliary Power Supplies
- Tablets
- Standby Power Supplies
- Standby Power for General Off-Line Applications
