Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm), 7 Leads |
Number of Pins |
8 |
Weight |
2.26799g |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
1999 |
Series |
TinySwitch®-III |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Power Rating |
28W |
Max Power Dissipation |
28W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Frequency |
132kHz |
Pin Count |
8 |
JESD-30 Code |
R-PDIP-T7 |
Number of Outputs |
1 |
Output Voltage |
12V |
Output Type |
Adjustable |
Input Voltage-Nom |
2.2V |
Max Supply Voltage |
265V |
Min Supply Voltage |
90V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Operating Supply Current |
445μA |
Nominal Supply Current |
445μA |
Output Power |
21.5W |
Control Features |
EN |
Topology |
Flyback |
Min Input Voltage |
85V |
Max Input Voltage |
265V |
Control Technique |
PULSE WIDTH MODULATION |
Supply Current-Max (Isup) |
0.54mA |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
Max Duty Cycle |
65 % |
Max Junction Temperature (Tj) |
150°C |
Max Supply Voltage (AC) |
265V |
Duty Cycle |
65% |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Min Supply Voltage (AC) |
85V |
Height |
4.06mm |
Length |
9.575mm |
Width |
7.62mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
TNY278PN Overview
It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .You can get it in AC/DC power converter Tube .This AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .As a result, it has had 7 terminations.It contains 8 pins.There are 8 pins on the ac-dc converter.The ac dc converters are suitable for mounting by Through Hole .It belongs to the family of TinySwitch?-III manufacturers.AC to DC converter is necessary to run 1 outputs.As a result, its output voltage is 12V .When operating at a frequency of 132kHz , AC to DC converter is capable of reaching high efficiency.You can read the standard of REACH SVHC : No SVHC .An input voltage of 265V is available for powering the AC to DC converter.Coverters generate 21.5W as their output power.If the input voltage is less than 85V V, the AC to DC inverter can be used.A voltage of 85V is the minimum supply voltage across the converter.Across the converter, a maximum supply voltage of 265V may be applied.AC to DC power converters should be able to accept input voltages (AC) below 265V .AC to DC converter can work with the minimum supply voltage of 90V .This output is configured to use Adjustable .
TNY278PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins
Output Type : Adjustable
TNY278PN Applications
There are a lot of Power Integrations TNY278PN AC DC Converters applications.
- Standby power
- Battery chargers for cellular phones
- Z-Wave
- Chargers for cell/cordless phones
- AC?DC USB chargers for Cameras
- Auxiliary Power Supplies
- Consumer electronics
- Smartphones
- Low power ac?dc Adapters for Chargers
- WiFi Wireless