banner_page

TNY279GN

7 Terminations7 Pin AC to DC power converterTinySwitch?-III Series 1 Outputs132kHz Min 85V VMax 265V V


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-TNY279GN
  • Package: 8-SMD (7 Leads), Gull Wing
  • Datasheet: PDF
  • Stock: 853
  • Description: 7 Terminations7 Pin AC to DC power converterTinySwitch?-III Series 1 Outputs132kHz Min 85V VMax 265V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SMD (7 Leads), Gull Wing
Number of Pins 7
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2016
Series TinySwitch®-III
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 4 (72 Hours)
Number of Terminations 7
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Power Rating 25W
Max Power Dissipation 32W
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) 40
Pin Count 8/7
Number of Outputs 1
Output Voltage 12V
Output Type Adjustable
Input Voltage-Nom 2.2V
Analog IC - Other Type SWITCHING REGULATOR
Nominal Supply Current 510μA
Output Power 25W
Control Features EN
Topology Flyback
Min Input Voltage 85V
Frequency - Switching 132kHz
Max Input Voltage 265V
Control Technique PULSE WIDTH MODULATION
Supply Current-Max (Isup) 0.64mA
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 65 %
Max Supply Voltage (AC) 265V
Output Isolation Isolated
Voltage - Breakdown 700V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Min Supply Voltage (AC) 85V
Height 3.68mm
Length 9.83mm
Width 6.6mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

TNY279GN Overview


This ac to dc converter is included in the package 8-SMD (7 Leads), Gull Wing .Tube case is available for the ac dc converter.There is a mounting point for this AC/DC converter in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.This AC DC converter employs SWITCHING REGULATOR analog IC type.132kHz is the switching frequency.A total of 7 terminations have been recorded.Approximately 7 pins are present on the ac/dc converter.There are 8/7 pins on the ac-dc converter.Suitable mounting is provided by Surface Mount .It belongs to the manufacturer family of TinySwitch?-III .The number of outputs to run is 1 .This AC/DC converter produces a voltage of 12V as its output.It is possible to read the REACH SVHC standard at: No SVHC .The AC to DC converter can be powered under 265V voltage.It is assumed that a coverter generates 25W as its output power.A voltage of less than 85V V can be used with the AC to DC inverter.Across the converter, the minimum supply voltage is 85V .A maximum voltage of 265V can be applied across the converter.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .It is configured to use Adjustable as an output.

TNY279GN Features


Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 132kHz
With 7 pins
Output Type : Adjustable

TNY279GN Applications


There are a lot of Power Integrations TNY279GN AC DC Converters applications.

  • Auxiliary Power Supplies
  • Appliance Power Supplies
  • Standby and Auxiliary Power Supplies
  • Adapter/Charger for Cell
  • Battery Chargers
  • USB type-c v1.2 chargers with optional VDM
  • Standby power supplies for TV
  • Adapter/Charger for Cordless Phones
  • AC?DC USB chargers for Cell Phones
  • Records

Write a review

Note: HTML is not translated!
    Bad           Good