Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm), 7 Leads |
Surface Mount |
NO |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2009 |
Series |
TinySwitch®-III |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Power (Watts) |
32W |
Power Rating |
25W |
Max Power Dissipation |
32W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Pin Count |
8 |
JESD-30 Code |
R-PDIP-T7 |
Number of Outputs |
1 |
Output Voltage |
12V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
510μA |
Output Current |
1A |
Output Power |
25W |
Control Features |
EN |
Topology |
Flyback |
Frequency - Switching |
132kHz |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
Max Duty Cycle |
65 % |
Max Supply Voltage (AC) |
265V |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
Min Supply Voltage (AC) |
85V |
Length |
9.575mm |
Width |
7.62mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
TNY279PG Overview
8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.There is a AC/DC power converter of Tube available.Through Hole is mounted in the way of this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.An analog IC of type SWITCHING REGULATOR is employed in this AC DC converter.At this point, the switching frequency reaches 132kHz .As a result, it has had 7 terminations.Up to 8 pins are present on the ac-dc converter.A member of the TinySwitch?-III manufacturer family, it has the following characteristics.There are 1 outputs to run.It has been set to 1A for the output current.The output voltage of the AC/DC converter is 12V .The output power of a coverter is assumed to be 25W .This converter requires a minimum supply voltage of 85V volts.265V is the maximum supply voltage across the converter.
TNY279PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 132kHz
Output Current at 1A
TNY279PG Applications
There are a lot of Power Integrations TNY279PG AC DC Converters applications.
- Utility meters
- Low power ac?dc Adapters for Chargers
- Power adapters for monitors
- PDAs
- MP3
- AC/DC LED Driver applications
- AC/DC Adaptors/Chargers for PDAs
- Digital cameras
- Charger
- AC?DC USB chargers for Cameras