TNY279PN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 2.26799g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | TinySwitch®-III |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 12W |
| Max Power Dissipation | 32W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 132kHz |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | Adjustable |
| Input Voltage-Nom | 2.2V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 510μA |
| Output Power | 12W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Output Current-Max | 0.695A |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.64mA |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 65 % |
| Duty Cycle | 65% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TNY279PN Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.The ac dc converter is available in Tube case.Through Hole is mounted in the way of this AC/DC converter.To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .SWITCHING REGULATOR analog ICs are employed in this AC DC converter.There are a total of 7 terminations in it.There are 7 pins on the ac/dc converter.In this ac-dc converter, there are 8 pins.The ac dc converters are suitable to mount by Through Hole .A member of the TinySwitch?-III manufacturer family, it has the following characteristics.A total of 1 outputs are available for processing.In this AC to DC transformer, the output voltage is 12V .A high efficiency is achieved when operating at a frequency of 132kHz .An amount of current of 0.695A can be supplied to the ac to dc inverter.You are able to read the REACH SVHC standard at: No SVHC .Input voltage for the AC to DC converter is available under 265V .12W is the output power of a coverter.An input voltage of less than 85V volts can be used with the AC to DC inverter.It is configured with Adjustable as the output.
TNY279PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Type : Adjustable
TNY279PN Applications
There are a lot of Power Integrations TNY279PN AC DC Converters applications.
- Battery chargers for cellular phones
- AC--DC Adapter
- Power adapters for network devices
- 3.3V power supplies
- MP3
- Appliance Power Supplies
- Battery Chargers
- Set-top boxes
- Low power ac?dc Adapters for Chargers
- IoT Applications
