TNY280GN-TL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | TinySwitch®-III |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power (Watts) | 36.5W |
| Max Power Dissipation | 36.5W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8/7 |
| JESD-30 Code | R-PDSO-G7 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Input Voltage-Nom | 2.2V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 630μA |
| Output Power | 28.5W |
| Control Features | EN |
| Topology | Flyback |
| Frequency - Switching | 132kHz |
| Input Voltage (Max) | 2.6V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.76mA |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 65 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TNY280GN-TL Overview
It is embedded in package 8-SMD (7 Leads), Gull Wing .In Tape & Reel (TR) case, the ac dc converter is available.It is mounted in the way of Surface Mount .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.132kHz is the switching frequency.In total, it has 7 terminations.On this ac/dc converter, there are 8 pins.In this ac-dc converter, there are 8/7 pins.A member of the TinySwitch?-III manufacturer family, it has the following characteristics.In this AC to DC transformer, there are 1 outputs to run.As a result, its output voltage is 12V .Using a unique technique, it is possible to ensure an input voltage with a maximum value of 2.6V .Coverters generate 28.5W as their output power.A minimum voltage of 85V is required across the converter.The maximum supply voltage across the converter is 265V .
TNY280GN-TL Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 132kHz
With 8 pins
TNY280GN-TL Applications
There are a lot of Power Integrations TNY280GN-TL AC DC Converters applications.
- AC/DC Adaptors/Chargers for Cell Phones
- Cleaners
- Adapters for Handheld Electronics
- PDAs
- AC/DC Adaptors/Chargers for E-books
- Appliance Power Supplies
- MP3
- Standby power supplies for IR
- LED lights
- Replaces linear transformers
