Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm), 7 Leads |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2009 |
Series |
TinySwitch®-III |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Power (Watts) |
36.5W |
Power Rating |
28.5W |
Max Power Dissipation |
36.5W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Pin Count |
8 |
JESD-30 Code |
R-PDIP-T7 |
Number of Outputs |
1 |
Output Voltage |
12V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
630μA |
Output Current |
1A |
Output Power |
28.5W |
Control Features |
EN |
Topology |
Flyback |
Frequency - Switching |
132kHz |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
Max Duty Cycle |
65 % |
Max Supply Voltage (AC) |
265V |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
Min Supply Voltage (AC) |
85V |
Length |
9.575mm |
Width |
7.62mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
TNY280PG Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .You can get it in AC/DC power converter Tube .There is a AC/DC converter mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.Analog IC type SWITCHING REGULATOR is utilized in this AC DC converter.There is 132kHz switching frequency.There have been 7 terminations of this program.The pins of the ac-dc converter count up to 8 .There are no problem mounting the ac dc converters by Through Hole .This AC to DC converter belongs to the TinySwitch?-III family of manufacturers.Running 1 outputs is available.We have set the output current to 1A .In this AC to DC transformer, the output voltage is 12V .Coverters generate 28.5W in terms of output power.In order for the converter to function properly, the supply voltage must be at least 85V .There is a maximum voltage supply across the converter of 265V volts.
TNY280PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 132kHz
Output Current at 1A
TNY280PG Applications
There are a lot of Power Integrations TNY280PG AC DC Converters applications.
- Handheld/Battery-Powered Systems
- Air Conditioning
- Wireless System
- Standby power
- Networking
- ATX/BTX Auxiliary Power
- Z-Wave
- Shaver Charger
- Standby Power Supplies
- Switching AC-DC Charger