TNY284DG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | TinySwitch®-4 |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Terminal Finish | MATTE TIN |
| Power (Watts) | 6W |
| Additional Feature | SEATED_HT CALCULATED |
| Power Rating | 8.5W |
| Max Power Dissipation | 11W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Number of Outputs | 1 |
| Output Voltage | 265V |
| Max Supply Voltage | 265V |
| Min Supply Voltage | 85V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 400μA |
| Output Power | 11W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 124kHz~140kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 67 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TNY284DG Overview
The ac to dc converter is embedded in 8-SOIC (0.154, 3.90mm Width), 7 Leads package.Tube case is available for the ac dc converter.As you can see, this AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.The AC DC converter uses a type ANALOG CIRCUIT analog integrated circuit.In this AC to DC transformer, the switching frequency is 124kHz~140kHz .As a result, it has had 7 terminations.There are 7 pins on the ac/dc converter.The ac dc converters are suitable for mounting by Surface Mount .This AC to DC converter belongs to the TinySwitch?-4 manufacturer family.A total of 1 outputs are available for processing.The output voltage of the AC/DC converter is 265V .REACH SVHC standard can be found at No SVHC .The AC to DC converter input voltage can be powered under 265V .11W is the output power of a coverter.As a result of using this ACDC converter, SEATED_HT CALCULATED can also be detected.An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.It is recommended to keep the voltage (AC) that can be applied to the AC to DC power converter below 265V .There is 85V minimum supply voltage requirement for this AC to DC power supply.
TNY284DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 124kHz~140kHz
With 7 pins
TNY284DG Applications
There are a lot of Power Integrations TNY284DG AC DC Converters applications.
- Laptops and personal digital assistants
- Adapter/Charger for Cordless Phones
- Adaptors for Portable Media Player
- Adapter/Charger for Cell
- Utility meters
- AC--DC Adapter
- USB-PD 2.0
- Portable Apparatus
- Wireless System
- Appliance Power Supplies
