TNY284KG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | TinySwitch®-4 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 11 |
| Terminal Finish | MATTE TIN |
| Power (Watts) | 6W |
| Additional Feature | SEATED_HT CALCULATED |
| Power Rating | 8.5W |
| Max Power Dissipation | 11W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Number of Outputs | 1 |
| Output Voltage | 265V |
| Max Supply Voltage | 265V |
| Min Supply Voltage | 85V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 400μA |
| Output Power | 11W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 124kHz~140kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 67 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.49mm |
| Width | 8.89mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TNY284KG Overview
An embedded ac to dc converter is included in 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad package.The AC/DC power converter is available in Tube .Surface Mount mounts this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.An analog IC of type ANALOG CIRCUIT is employed in this AC DC converter.As a result, the switching frequency reaches 124kHz~140kHz .In total, there are 11 terminations.It contains 11 pins.The ac dc converters are suitable to mount by Surface Mount .It is a member of TinySwitch?-4 manufacturer family.In this AC to DC transformer, there are 1 outputs to run.This AC/DC converter produces a voltage of 265V as its output.This is the standard of REACH SVHC : No SVHC .It is available to power the AC to DC converter input voltage under 265V .The output power of a coverter generates 11W .When utilizing this ACDC converter, SEATED_HT CALCULATED can also be discovered.An input voltage of less than 85V V is required to operate the AC to DC inverter.An input voltage (AC) should be applied to the AC to DC power converter that falls below 265V volts.As long as the supply voltage is 85V , it will operate.
TNY284KG Features
Packaged with 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Switching Frequency at 124kHz~140kHz
With 11 pins
TNY284KG Applications
There are a lot of Power Integrations TNY284KG AC DC Converters applications.
- Consumer electronics
- Portable Apparatus
- Handheld/Battery-Powered Systems
- MP3
- Battery chargers for mobile devices with touchpad display
- Z-Wave
- Charger
- Chargers for cell/cordless phones
- Low-Voltage I/O System Power
- Standby and Auxiliary Power Supplies
