TNY284PG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | TinySwitch®-4 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Terminal Finish | MATTE TIN |
| Additional Feature | SEATED_HT CALCULATED |
| Power Rating | 8.5W |
| Max Power Dissipation | 6W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Number of Outputs | 1 |
| Output Voltage | 265V |
| Max Supply Voltage | 750V |
| Min Supply Voltage | 50V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 360μA |
| Output Power | 11W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 124kHz~140kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 67 % |
| Max Junction Temperature (Tj) | 150°C |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 4.06mm |
| Length | 9.44mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TNY284PG Overview
In the 8-DIP (0.300, 7.62mm), 7 Leads package, the ac to dc converter is embedded.It is available in Tube AC/DC power converter.It is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.A ANALOG CIRCUIT analog integrated circuit is used in this AC DC converter.When the switching frequency reaches 124kHz~140kHz , the circuit is closed.A total of 7 terminations have been recorded.The ac/dc converter has 7 pins.It are possible to mount thare ac dc converters by Through Hole .It belongs to a manufacturer family of TinySwitch?-4 .Running 1 outputs is available.This AC/DC converter produces a voltage of 265V as its output.You may read the REACH SVHC standard at No SVHC .The AC to DC converter can be powered from the input voltage under 265V .In the AC to DC transformer of a coverter, the output power generated is 11W .Using this ACDC converter, SEATED_HT CALCULATED is also accessible.It is possible to use the AC to DC inverter with an input voltage less than 85V V.AC to DC power converters should be able to accept input voltages (AC) below 265V .If the supply voltage is set to 50V , then it can operate.
TNY284PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 124kHz~140kHz
With 7 pins
TNY284PG Applications
There are a lot of Power Integrations TNY284PG AC DC Converters applications.
- Air conditioners
- AC?DC USB chargers for Tablets
- Adapter/Charger for Cordless Phones
- Cleaners
- Battery chargers for cordless
- Portable Apparatus
- 3.3V power supplies
- AC/DC LED Driver applications
- Consumer electronics
- Small off-line low voltage power supplies
