TNY285DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | TinySwitch®-4 |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Terminal Finish | MATTE TIN |
| Power (Watts) | 8.5W |
| Additional Feature | SEATED_HT CALCULATED |
| Power Rating | 11.5W |
| Max Power Dissipation | 15W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Number of Outputs | 1 |
| Output Voltage | 265V |
| Max Supply Voltage | 265V |
| Min Supply Voltage | 85V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 440μA |
| Output Power | 15W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 124kHz~140kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 67 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TNY285DG Overview
There is a ac to dc converter embedded in package 8-SOIC (0.154, 3.90mm Width), 7 Leads .The AC/DC power converter is available in Tube .It is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.Analog IC type ANALOG CIRCUIT is utilized in this AC DC converter.Switching frequency reaches 124kHz~140kHz Hz.It has a total of 7 terminations.On this ac/dc converter, there are 7 pins.Suitable mounting is provided by Surface Mount .Currently, it is acdc converter of the manufacturer family of TinySwitch?-4 .The number of outputs to run is 1 .Its output voltage amounts to 265V .In the following link, you will find the REACH SVHC standard: No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 265V .In the AC to DC transformer of a coverter, the output power generated is 15W .As a result of using this ACDC converter, SEATED_HT CALCULATED can also be detected.Input voltages less than 85V volts can be used to operate the AC to DC inverter.Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 265V .AC to DC converter can work with the minimum supply voltage of 85V .
TNY285DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 124kHz~140kHz
With 7 pins
TNY285DG Applications
There are a lot of Power Integrations TNY285DG AC DC Converters applications.
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- RCC SMPS
- Industrial controls
- Universal Off-Line Power Supplies
- ZigBee
- Standby Power Supplies
- White goods
- DVD players
- Dimmers
- Smartphones
