TNY285KG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | TinySwitch®-4 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 11 |
| Terminal Finish | MATTE TIN |
| Power (Watts) | 11W |
| Additional Feature | SEATED_HT CALCULATED |
| Power Rating | 11.5W |
| Max Power Dissipation | 15W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Number of Outputs | 1 |
| Output Voltage | 265V |
| Max Supply Voltage | 265V |
| Min Supply Voltage | 85V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 440μA |
| Output Power | 15W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 124kHz~140kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 67 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.49mm |
| Width | 8.89mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TNY285KG Overview
An embedded ac to dc converter is included in 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad package.Tube case is available for the ac dc converter.In this case, the AC/DC converter is mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.Analog IC type ANALOG CIRCUIT is utilized in this AC DC converter.In this AC to DC transformer, the switching frequency is 124kHz~140kHz .Total terminations are 11 .On the ac/dc converter, there are 11 pins.The ac dc converters are suitable for mounting by Surface Mount .A member of the TinySwitch?-4 manufacturer family, it has the following characteristics.In this AC to DC transformer, there are 1 outputs to run.The output voltage of the AC/DC converter is 265V .You can read the standard of REACH SVHC : No SVHC .Input voltages under 265V can be used to power the AC to DC converter.Coverters generate 15W as their output power.When utilizing this ACDC converter, SEATED_HT CALCULATED can also be discovered.An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.The AC to DC power converter's input voltage (AC) should be below 265V .The AC to DC power supply can function with a supply voltage as low as 85V .
TNY285KG Features
Packaged with 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Switching Frequency at 124kHz~140kHz
With 11 pins
TNY285KG Applications
There are a lot of Power Integrations TNY285KG AC DC Converters applications.
- Battery chargers for cordless
- Chargers for cell/cordless phones
- Laptops and personal digital assistants
- Set -Top Box (STB) Power Supply
- Low-Voltage I/O System Power
- AC-DC Output Power Conversion Applications
- Battery Chargers
- Adaptors for DSCs
- AC--DC Adapter
- Standby Power Supplies
