TNY285PG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | TinySwitch®-4 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Terminal Finish | MATTE TIN |
| Power (Watts) | 8.5W |
| Additional Feature | SEATED_HT CALCULATED |
| Power Rating | 11.5W |
| Max Power Dissipation | 15W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Number of Outputs | 1 |
| Output Voltage | 265V |
| Max Supply Voltage | 265V |
| Min Supply Voltage | 85V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 440μA |
| Output Power | 15W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 124kHz~140kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 67 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 4.06mm |
| Length | 9.44mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TNY285PG Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .The AC/DC power converter type is Tube .It is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.In this AC DC converter, the analog IC type is ANALOG CIRCUIT .As a result, the switching frequency reaches 124kHz~140kHz .As a result, it has a total of 7 terminations.It contains 7 pins.Currently, it is acdc converter of the manufacturer family of TinySwitch?-4 .Running 1 outputs is available.The output voltage of the AC/DC converter is 265V .You can read the standard of REACH SVHC : No SVHC .There is an option to power the AC to DC converter input voltage under 265V .It is assumed that a coverter generates 15W as its output power.Using this ACDC converter, SEATED_HT CALCULATED is also accessible.If the input voltage is less than 85V V, the AC to DC inverter can be used.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .It is capable of working with a minimum supply voltage of 85V volts.
TNY285PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 124kHz~140kHz
With 7 pins
TNY285PG Applications
There are a lot of Power Integrations TNY285PG AC DC Converters applications.
- Records
- Adapter/Charger for Cordless Phones
- Power adapters for monitors
- Networking
- AC/DC Adaptors/Chargers for E-books
- Replaces linear transformers
- Universal Off-Line Power Supplies
- Battery Chargers
- Standby power supplies for VCR
- AC/DC Adaptors/Chargers for Cordless Phone
