banner_page

TNY286DG

7 Terminations7 Pin AC to DC power converterTinySwitch?-4 Series 1 Outputs124kHz~140kHz


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-TNY286DG
  • Package: 8-SOIC (0.154, 3.90mm Width), 7 Leads
  • Datasheet: PDF
  • Stock: 674
  • Description: 7 Terminations7 Pin AC to DC power converterTinySwitch?-4 Series 1 Outputs124kHz~140kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width), 7 Leads
Number of Pins 7
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2015
Series TinySwitch®-4
JESD-609 Code e3
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 7
Terminal Finish MATTE TIN
Power (Watts) 13W
Additional Feature SEATED_HT CALCULATED
Power Rating 15W
Max Power Dissipation 19W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Time@Peak Reflow Temperature-Max (s) 40
Number of Outputs 1
Output Voltage 265V
Max Supply Voltage 265V
Min Supply Voltage 85V
Analog IC - Other Type ANALOG CIRCUIT
Nominal Supply Current 470μA
Output Power 19W
Control Features EN
Topology Flyback
Min Input Voltage 85V
Frequency - Switching 124kHz~140kHz
Max Input Voltage 265V
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 67 %
Output Isolation Isolated
Voltage - Breakdown 725V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Length 4.9mm
Width 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant

TNY286DG Overview


8-SOIC (0.154, 3.90mm Width), 7 Leads is the package in which the ac to dc converter is embedded.There is a AC/DC power converter of Tube available.The AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.In this AC DC converter, an analog integrated circuit (IC) of type ANALOG CIRCUIT is employed.The switching frequency reaches 124kHz~140kHz .There are a total of 7 terminations in it.The ac/dc converter has a total of 7 pins.The ac dc converters are suitable for mounting by Surface Mount .The product is acdc converter of the TinySwitch?-4 manufacturer family.Running 1 outputs is available.As a result, its output voltage is 265V .REACH SVHC standard can be found at No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 265V .Coverters generate 19W in terms of output power.Also, SEATED_HT CALCULATED can be found using this ACDC converter.An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.An input voltage (AC) should be applied under 265V to the AC to DC power converter.If the supply voltage is set to 85V , then it can operate.

TNY286DG Features


Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 124kHz~140kHz
With 7 pins

TNY286DG Applications


There are a lot of Power Integrations TNY286DG AC DC Converters applications.

  • Standby and Auxiliary Power Supplies Set Top Boxes (STB)
  • Low-Voltage I/O System Power
  • AC/DC Adaptors/Chargers for Cell Phones
  • Linear Adapter Replacements
  • Rice Cooker
  • Switching AC-DC Adapter
  • Auxiliary Power Supplies
  • AC?DC USB chargers for Cameras
  • Automotive Telematics
  • Air conditioners

Write a review

Note: HTML is not translated!
    Bad           Good