TNY286PG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | TinySwitch®-4 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Terminal Finish | MATTE TIN |
| Power (Watts) | 13W |
| Additional Feature | SEATED_HT CALCULATED |
| Power Rating | 15W |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Number of Outputs | 1 |
| Output Voltage | 265V |
| Max Supply Voltage | 265V |
| Min Supply Voltage | 85V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 470μA |
| Output Power | 19W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 124kHz~140kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 67 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 4.06mm |
| Length | 9.44mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TNY286PG Overview
It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .Tube case is available for the ac dc converter.The AC/DC converter is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.An analog IC of type ANALOG CIRCUIT is employed in this AC DC converter.When the switching frequency reaches 124kHz~140kHz , the circuit is closed.It has a total of 7 terminations.The ac/dc converter has a total of 7 pins.There are no problem mounting the ac dc converters by Through Hole .This AC to DC converter belongs to the TinySwitch?-4 family of manufacturers.There are 1 outputs to be run.It produces a voltage of 265V .Here is the standard for REACH SVHC : No SVHC .The AC to DC converter input voltage can be powered under 265V .The output power of a coverter is assumed to be 19W .Also, SEATED_HT CALCULATED can be found using this ACDC converter.An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .It is capable of working with a minimum supply voltage of 85V volts.
TNY286PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 124kHz~140kHz
With 7 pins
TNY286PG Applications
There are a lot of Power Integrations TNY286PG AC DC Converters applications.
- PDAs
- Adapter/Charger for Cell
- Home appliances
- Shaver Charger
- Universal Off-Line Power Supplies
- AC?DC USB chargers for Tablets
- Industrial controls
- AC-DC Output Power Conversion Applications
- Standby power supplies for VCR
- Consumer electronics
