TNY287DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | TinySwitch®-4 |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Terminal Finish | MATTE TIN |
| Power (Watts) | 11.5W |
| Additional Feature | SEATED_HT CALCULATED |
| Power Rating | 18W |
| Max Power Dissipation | 23.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Number of Outputs | 1 |
| Output Voltage | 265V |
| Max Supply Voltage | 265V |
| Min Supply Voltage | 85V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 550μA |
| Output Power | 23.5W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 124kHz~140kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 67 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TNY287DG Overview
The ac to dc converter is embedded in 8-SOIC (0.154, 3.90mm Width), 7 Leads package.In Tube AC/DC power converter, it is available.Surface Mount is mounted in the way of this AC/DC converter.To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .ANALOG CIRCUIT analog ICs are employed in this AC DC converter.When the switching frequency reaches 124kHz~140kHz , the circuit is closed.There have been 7 terminations of this program.In this ac/dc converter, there are 7 pins.The ac dc converters are suitable for mounting by Surface Mount .It belongs to the family of TinySwitch?-4 manufacturers.Running 1 outputs is available.There is 265V output voltage from this AC/DC converter.You can read the standard of REACH SVHC : No SVHC .The AC to DC converter input voltage can be powered under 265V .A coverter produces 23.5W watts of output power.It is also possible to determine SEATED_HT CALCULATED using this ACDC converter.An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.An input voltage (AC) should be applied under 265V to the AC to DC power converter.The AC to DC power supply can operate with a minimum supply voltage of 85V volts.
TNY287DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 124kHz~140kHz
With 7 pins
TNY287DG Applications
There are a lot of Power Integrations TNY287DG AC DC Converters applications.
- Set -Top Box (STB) Power Supply
- Set-top boxes
- AC-DC Output Power Conversion Applications
- Automotive Clusters
- Adapter/Charger for Cordless Phones
- Networking
- AC?DC USB chargers for Cameras
- IoT Applications
- Universal input AC/DC adapters (15W - 45W)
- Battery chargers for mobile devices with touchpad display
