TNY287KG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | TinySwitch®-4 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 11 |
| Terminal Finish | MATTE TIN |
| Additional Feature | SEATED_HT CALCULATED |
| Power Rating | 18W |
| Max Power Dissipation | 23.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Number of Outputs | 1 |
| Output Voltage | 265V |
| Max Supply Voltage | 265V |
| Min Supply Voltage | 85V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 550μA |
| Output Power | 23.5W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 124kHz~140kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 67 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.49mm |
| Width | 8.89mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TNY287KG Overview
A ac to dc converter of the package 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad contains the ac to dc converter.The AC/DC power converter is available in Tube .There is a AC/DC converter mounted in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.Analog ICs of type ANALOG CIRCUIT are used in this AC DC converter.There is 124kHz~140kHz switching frequency.As a result, it has had 11 terminations.There are 11 pins on the ac/dc converter.The ac dc converters is suitable for mounting by Surface Mount .It belongs to the family of TinySwitch?-4 manufacturers.A total of 1 outputs are to be processed.In this AC to DC transformer, the output voltage is 265V .You can read the standard for REACH SVHC at: No SVHC .It is available to power the AC to DC converter input voltage under 265V .The output power of a coverter generates 23.5W .It is also possible to discover SEATED_HT CALCULATED when using this ACDC converter.The AC to DC inverter may be operated with an input voltage less than 85V volts.An input voltage (AC) should be applied under 265V to the AC to DC power converter.The AC to DC power supply can function with a minimum supply voltage of 85V volts.
TNY287KG Features
Packaged with 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Switching Frequency at 124kHz~140kHz
With 11 pins
TNY287KG Applications
There are a lot of Power Integrations TNY287KG AC DC Converters applications.
- Auxiliary Power Supplies
- Low-Voltage I/O System Power
- White goods
- Automotive Clusters
- SMPS house keeping power supplies
- Tablets
- Off--line Battery Charger
- Chargers for cell/cordless phones
- AC-DC Output Power Conversion Applications
- Rice Cooker
