banner_page

TNY287PG

7 Terminations7 Pin AC to DC power converterTinySwitch?-4 Series 1 Outputs124kHz~140kHz


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-TNY287PG
  • Package: 8-DIP (0.300, 7.62mm), 7 Leads
  • Datasheet: PDF
  • Stock: 107
  • Description: 7 Terminations7 Pin AC to DC power converterTinySwitch?-4 Series 1 Outputs124kHz~140kHz (Kg)

Details

Tags

Parameters
Output Power 23.5W
Control Features EN
Topology Flyback
Min Input Voltage 85V
Frequency - Switching 124kHz~140kHz
Max Input Voltage 265V
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 67 %
Output Isolation Isolated
Voltage - Breakdown 725V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Height Seated (Max) 4.06mm
Length 9.44mm
Width 6.35mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm), 7 Leads
Number of Pins 7
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2015
Series TinySwitch®-4
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 7
Terminal Finish MATTE TIN
Power (Watts) 13W
Additional Feature SEATED_HT CALCULATED
Power Rating 18W
Max Power Dissipation 23.5W
Terminal Position DUAL
Number of Functions 1
Terminal Pitch 2.54mm
Number of Outputs 1
Output Voltage 265V
Max Supply Voltage 265V
Min Supply Voltage 85V
Analog IC - Other Type ANALOG CIRCUIT
Operating Supply Current 550μA

TNY287PG Overview


8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.The AC/DC power converter Tube is available for this product.A AC/DC converter of this type is mounted in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.In this AC DC converter, the analog IC type is ANALOG CIRCUIT .Switching frequency reaches 124kHz~140kHz Hz.A total of 7 terminations have been recorded.There are 7 pins on this ac/dc converter.Through Hole are the recommended mounting method for the ac dc converters.A member of the TinySwitch?-4 manufacturer family, it has the following characteristics.The number of outputs to run is 1 .As a result, its output voltage is 265V .You may read the REACH SVHC standard at No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 265V .The output power of a coverter generates 23.5W .In addition to SEATED_HT CALCULATED , this ACDC converter can also be used to determine SEATED_HT CALCULATED .If the input voltage is less than 85V V, the AC to DC inverter can be used.An input voltage (AC) should be applied under 265V to the AC to DC power converter.As long as the supply voltage is 85V , it will operate.

TNY287PG Features


Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 124kHz~140kHz
With 7 pins

TNY287PG Applications


There are a lot of Power Integrations TNY287PG AC DC Converters applications.

  • Open Frame Switching Power Supply
  • Adaptors for DSCs
  • AC/DC Adaptors/Chargers for PDAs
  • Linear Adapter Replacements
  • USB-PD 2.0
  • Handheld/Battery-Powered Systems
  • Home appliances
  • Standby Power Supplies
  • Battery Chargers
  • DVD players

Write a review

Note: HTML is not translated!
    Bad           Good