banner_page

TNY288DG

7 Terminations7 Pin AC to DC power converterTinySwitch?-4 Series 1 Outputs124kHz~140kHz


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-TNY288DG
  • Package: 8-SOIC (0.154, 3.90mm Width), 7 Leads
  • Datasheet: PDF
  • Stock: 180
  • Description: 7 Terminations7 Pin AC to DC power converterTinySwitch?-4 Series 1 Outputs124kHz~140kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width), 7 Leads
Number of Pins 7
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2015
Series TinySwitch®-4
JESD-609 Code e3
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 7
Terminal Finish MATTE TIN
Additional Feature SEATED_HT CALCULATED
Power Rating 19.5W
Max Power Dissipation 14.5W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Time@Peak Reflow Temperature-Max (s) 40
Number of Outputs 1
Max Supply Voltage 725V
Min Supply Voltage -300mV
Analog IC - Other Type ANALOG CIRCUIT
Operating Supply Current 615μA
Output Power 26W
Control Features EN
Topology Flyback
Min Input Voltage 85V
Frequency - Switching 124kHz~140kHz
Max Input Voltage 265V
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 67 %
Output Isolation Isolated
Voltage - Breakdown 725V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Length 4.9mm
Width 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant

TNY288DG Overview


This ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width), 7 Leads .It is available in Tube AC/DC power converter.Surface Mount is mounted in the way of this AC/DC converter.For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.Analog IC type ANALOG CIRCUIT is utilized in this AC DC converter.In this AC to DC transformer, the switching frequency is 124kHz~140kHz .There are a total of 7 terminations in it.It contains 7 pins.It is suitable for mounting by Surface Mount .This AC to DC converter belongs to the TinySwitch?-4 manufacturer family.In this AC to DC transformer, there are 1 outputs to run.In the following link, you will find the REACH SVHC standard: No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 265V .A coverter produces 26W watts of output power.It is also possible to determine SEATED_HT CALCULATED using this ACDC converter.If the input voltage is less than 85V V, the AC to DC inverter can be used.A AC to DC power converter's input voltage (AC) should not exceed 265V .It is capable of working with a minimum supply voltage of -300mV volts.

TNY288DG Features


Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 124kHz~140kHz
With 7 pins

TNY288DG Applications


There are a lot of Power Integrations TNY288DG AC DC Converters applications.

  • Adaptors for Portable Media Player
  • Handheld/Battery-Powered Systems
  • MP3
  • Battery chargers for cellular phones
  • AC--DC Adapter
  • Battery chargers for cordless
  • 3.3V power supplies
  • White goods
  • Standby and Auxiliary Power Supplies Set Top Boxes (STB)
  • Standby Power for General Off-Line Applications

Write a review

Note: HTML is not translated!
    Bad           Good