TNY288KG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | TinySwitch®-4 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 11 |
| Terminal Finish | MATTE TIN |
| Power (Watts) | 23W |
| Additional Feature | SEATED_HT CALCULATED |
| Power Rating | 21.5W |
| Max Power Dissipation | 28W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Number of Outputs | 1 |
| Output Voltage | 265V |
| Max Supply Voltage | 265V |
| Min Supply Voltage | 85V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 650μA |
| Output Power | 28W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 124kHz~140kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 67 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.49mm |
| Width | 8.89mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TNY288KG Overview
There is a ac to dc converter embedded in package 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad .There is a AC/DC power converter of Tube available.A AC/DC converter of this type is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.Analog ICs of type ANALOG CIRCUIT are used in this AC DC converter.When the switching frequency reaches 124kHz~140kHz , the circuit is closed.Total terminations are 11 .Approximately 11 pins are present on the ac/dc converter.Surface Mount are the recommended mounting method for the ac dc converters.The product is acdc converter of the TinySwitch?-4 manufacturer family.There are 1 outputs to be processed.It produces a voltage of 265V .You may read the REACH SVHC standard at No SVHC .The AC to DC converter input voltage can be powered under 265V .In the AC to DC transformer of a coverter, the output power is 28W .Additionally, SEATED_HT CALCULATED can be discovered using this ACDC converter.The AC to DC inverter can be used with an input voltage of less than 85V V.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .The AC to DC power supply can operate with a minimum supply voltage of 85V volts.
TNY288KG Features
Packaged with 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Switching Frequency at 124kHz~140kHz
With 11 pins
TNY288KG Applications
There are a lot of Power Integrations TNY288KG AC DC Converters applications.
- Tablets
- Battery Chargers
- AC/DC Adaptors/Chargers for Cell Phones
- Smartphones
- AC/DC Adaptors/Chargers for E-books
- AC/DC LED Driver applications
- AC-DC Output Power Conversion Applications
- Battery chargers for mobile devices with touchpad display
- USB type-c v1.2 chargers with optional VDM
- Rice Cooker
