banner_page

TNY289KG

11 Terminations11 Pin AC to DC power converterTinySwitch?-4 Series 1 Outputs124kHz~140kHz


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-TNY289KG
  • Package: 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
  • Datasheet: PDF
  • Stock: 898
  • Description: 11 Terminations11 Pin AC to DC power converterTinySwitch?-4 Series 1 Outputs124kHz~140kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Number of Pins 11
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2015
Series TinySwitch®-4
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 11
Terminal Finish MATTE TIN
Additional Feature SEATED_HT CALCULATED
Power Rating 25W
Max Power Dissipation 32W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Time@Peak Reflow Temperature-Max (s) 40
Number of Outputs 1
Output Voltage 265V
Max Supply Voltage 265V
Min Supply Voltage 85V
Analog IC - Other Type ANALOG CIRCUIT
Operating Supply Current 800μA
Output Power 32W
Control Features EN
Topology Flyback
Min Input Voltage 85V
Frequency - Switching 124kHz~140kHz
Max Input Voltage 265V
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 67 %
Output Isolation Isolated
Voltage - Breakdown 725V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Height Seated (Max) 2.49mm
Width 8.89mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant

TNY289KG Overview


In the package 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad , the ac to dc converter is embedded.The AC/DC power converter type is Tube .This AC/DC converter is mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.ANALOG CIRCUIT analog ICs are employed in this AC DC converter.When the switching frequency reaches 124kHz~140kHz , the circuit is closed.A total of 11 terminations have been recorded.There are 11 pins on this ac/dc converter.It is suitable for mounting by Surface Mount .The product is acdc converter of the TinySwitch?-4 manufacturer family.AC to DC converter is necessary to run 1 outputs.This AC/DC converter produces a voltage of 265V as its output.Here is the standard for REACH SVHC : No SVHC .Under 265V , it is possible to power the AC to DC converter's input voltage.Coverters generate 32W as their output power.It is also possible to determine SEATED_HT CALCULATED using this ACDC converter.If the input voltage is less than 85V V, the AC to DC inverter can be used.AC to DC power converters should be able to accept input voltages (AC) below 265V .A minimum supply voltage of 85V is sufficient for it to operate.

TNY289KG Features


Packaged with 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Switching Frequency at 124kHz~140kHz
With 11 pins

TNY289KG Applications


There are a lot of Power Integrations TNY289KG AC DC Converters applications.

  • Set-top boxes
  • Digital cameras
  • Rice Cooker
  • PDAs
  • Power tools fast chargers with trickle and on/off
  • Replacements for bulky plug-in transformers
  • Cellular phone chargers
  • Standby and Auxiliary Power Supplies
  • Switching AC-DC Charger
  • Power Adaptors

Write a review

Note: HTML is not translated!
    Bad           Good