banner_page

TNY290KG

11 Terminations11 Pin AC to DC power converterTinySwitch?-4 Series 1 Outputs124kHz~140kHz


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-TNY290KG
  • Package: 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
  • Datasheet: PDF
  • Stock: 317
  • Description: 11 Terminations11 Pin AC to DC power converterTinySwitch?-4 Series 1 Outputs124kHz~140kHz (Kg)

Details

Tags

Parameters
Terminal Finish MATTE TIN
Power (Watts) 28W
Additional Feature SEATED_HT CALCULATED
Power Rating 28.5W
Max Power Dissipation 36.5W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Time@Peak Reflow Temperature-Max (s) 40
Number of Outputs 1
Output Voltage 265V
Max Supply Voltage 265V
Min Supply Voltage 85V
Analog IC - Other Type ANALOG CIRCUIT
Operating Supply Current 930μA
Output Power 36.5W
Control Features EN
Topology Flyback
Min Input Voltage 85V
Frequency - Switching 124kHz~140kHz
Max Input Voltage 265V
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 67 %
Output Isolation Isolated
Voltage - Breakdown 725V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Height Seated (Max) 2.49mm
Width 8.89mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Number of Pins 11
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2015
Series TinySwitch®-4
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 11

TNY290KG Overview


It is embedded in package 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad .It is available in Tube AC/DC power converter.In this case, the AC/DC converter is mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.This AC DC converter employs ANALOG CIRCUIT analog IC type.In this AC to DC transformer, the switching frequency is 124kHz~140kHz .There have been 11 terminations of this program.There are 11 pins on the ac/dc converter.It are possible to mount thare ac dc converters by Surface Mount .This AC to DC converter belongs to the TinySwitch?-4 manufacturer family.A total of 1 outputs are to be processed.Its output voltage is265V .In the following link, you will find the REACH SVHC standard: No SVHC .An input voltage of 265V is available for powering the AC to DC converter.36.5W is the output power of a coverter.It is also possible to detect SEATED_HT CALCULATED when utilizing this ACDC converter.Input voltages less than 85V volts can be used to operate the AC to DC inverter.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .There is 85V minimum supply voltage requirement for this AC to DC power supply.

TNY290KG Features


Packaged with 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Switching Frequency at 124kHz~140kHz
With 11 pins

TNY290KG Applications


There are a lot of Power Integrations TNY290KG AC DC Converters applications.

  • Laptops
  • Remotely-controlled appliances
  • Humidifier
  • Home appliances
  • USB-PD 2.0
  • Z-Wave
  • Standby power supplies for IR
  • Off--line Battery Charger
  • Adapter/Charger for Cordless Phones
  • Utility meters

Write a review

Note: HTML is not translated!
    Bad           Good