banner_page

TNY290PG

7 Terminations7 Pin AC to DC power converterTinySwitch?-4 Series 1 Outputs124kHz~140kHz


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-TNY290PG
  • Package: 8-DIP (0.300, 7.62mm), 7 Leads
  • Datasheet: PDF
  • Stock: 247
  • Description: 7 Terminations7 Pin AC to DC power converterTinySwitch?-4 Series 1 Outputs124kHz~140kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm), 7 Leads
Surface Mount NO
Number of Pins 7
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2014
Series TinySwitch®-4
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 7
Terminal Finish MATTE TIN
Power (Watts) 20W
Additional Feature SEATED_HT CALCULATED
Power Rating 28.5W
Max Power Dissipation 36.5W
Terminal Position DUAL
Number of Functions 1
Terminal Pitch 2.54mm
Number of Outputs 1
Output Voltage 265V
Max Supply Voltage 265V
Min Supply Voltage 85V
Analog IC - Other Type ANALOG CIRCUIT
Operating Supply Current 930μA
Output Power 36.5W
Control Features EN
Topology Flyback
Min Input Voltage 85V
Frequency - Switching 124kHz~140kHz
Max Input Voltage 265V
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 67 %
Output Isolation Isolated
Voltage - Breakdown 725V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Height Seated (Max) 4.06mm
Length 9.44mm
Width 6.35mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant

TNY290PG Overview


This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .Tube case is available for the ac dc converter.As you can see, this AC/DC converter is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.Analog ICs of type ANALOG CIRCUIT are used in this AC DC converter.When the switching frequency reaches 124kHz~140kHz , the circuit is closed.As a result, it has had 7 terminations.On the ac/dc converter, there are 7 pins.Currently, it is acdc converter of the manufacturer family of TinySwitch?-4 .Running 1 outputs is available.Its output voltage is265V .It is possible to read the REACH SVHC standard at: No SVHC .There is an option to power the AC to DC converter input voltage under 265V .It is assumed that a coverter generates 36.5W as its output power.Using this ACDC converter, it is also possible to identify SEATED_HT CALCULATED .The AC to DC inverter may be operated with an input voltage less than 85V volts.Input voltage (AC) should be below 265V .A minimum supply voltage of 85V is sufficient for it to operate.

TNY290PG Features


Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 124kHz~140kHz
With 7 pins

TNY290PG Applications


There are a lot of Power Integrations TNY290PG AC DC Converters applications.

  • Adapter/Charger for Cordless Phones
  • Adapters for Handheld Electronics
  • Air conditioners
  • Lighting controls
  • Set-top boxes
  • Power adapters for network devices
  • Low power ac?dc Adapters for Chargers
  • Cellular phone chargers
  • Low-Voltage I/O System Power
  • Home Appliance Applications

Write a review

Note: HTML is not translated!
    Bad           Good