TNY379GN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Surface Mount | YES |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Series | TinySwitch®-PK |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Power (Watts) | 32W |
| Max Power Dissipation | 39W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8/7 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 2.2V |
| Min Supply Voltage | 700V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 100mA |
| Output Current | 870μA |
| Output Power | 39W |
| Control Features | EN |
| Topology | Flyback |
| Frequency - Switching | 132kHz~264kHz |
| Input Voltage (Max) | 2.6V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 65 % |
| Output Isolation | Isolated |
| Height Seated (Max) | 3.68mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
TNY379GN Overview
A ac to dc converter of the package 8-SMD (7 Leads), Gull Wing contains the ac to dc converter.In Tube AC/DC power converter, it is available.The AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.Analog IC type SWITCHING REGULATOR is utilized in this AC DC converter.Switching frequency reaches 132kHz~264kHz Hz.There are a total of 7 terminations in it.There are 7 pins on this ac/dc converter.There are 8/7 pins in the ac-dc converter.The product is acdc converter of the TinySwitch?-PK manufacturer family.There are 1 outputs to run.The output current is set to 870μA .It is possible to ensure a maximum value of 2.6V for the input voltage using a unique technique.A coverter produces 39W watts of output power.There is 700V minimum supply voltage requirement for this AC to DC power supply.
TNY379GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 132kHz~264kHz
With 7 pins
Output Current at 870μA
TNY379GN Applications
There are a lot of Power Integrations TNY379GN AC DC Converters applications.
- Standby and Auxiliary Power Supplies
- Linear Adapter Replacements
- MP3
- Adapter/Charger for Cell
- Dimmers
- Battery chargers for cordless
- PDAs
- AC--DC Adapter
- Z-Wave
- Standby Power for General Off-Line Applications
