Parameters |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
TOPSwitch®-II |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Switching Regulator or Controllers |
Max Power Dissipation |
25W |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Output Voltage |
5.7V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
1.2mA |
Output Current |
100mA |
Topology |
Boost, Buck, Flyback, Forward |
Control Mode |
VOLTAGE-MODE |
Frequency - Switching |
100kHz |
Control Technique |
PULSE WIDTH MODULATION |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Temperature |
Max Duty Cycle |
70 % |
Max Supply Voltage (AC) |
265V |
Duty Cycle |
67% |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
Min Supply Voltage (AC) |
85V |
Height Seated (Max) |
4.45mm |
Length |
9.59mm |
Width |
7.62mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
TOP223P Overview
In the 8-DIP (0.300, 7.62mm) package, the ac to dc converter is embedded.The ac dc converter is available in Tube case.Through Hole mounts this AC/DC converter.To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .SWITCHING REGULATOR analog ICs are employed in this AC DC converter.There is 100kHz switching frequency.A total of 8 terminations have been recorded.A ac/dc converter with 8 pins is available.A total of 8 pins are present on the ac-dc converter.It belongs to the family of TOPSwitch?-II manufacturers.Switching Regulator or Controllers contains the ac to dc conversions.Currently, the output current is set to 100mA .The output voltage of the AC/DC converter is 5.7V .In order for the converter to function properly, the supply voltage must be at least 85V .This converter can operate at a maximum supply voltage of 265V .
TOP223P Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 100kHz
With 8 pins
Output Current at 100mA
TOP223P Applications
There are a lot of Power Integrations TOP223P AC DC Converters applications.
- AC/DC Adaptors/Chargers for Cell Phones
- Off--line Battery Charger
- LED Driver
- AC-DC Output Power Conversion Applications
- DVD players
- Chargers for cell/cordless phones
- Smartphones
- Power Adaptors
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- PDAs