TOP243PN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| Series | TOPSwitch®-GX |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | PURE MATTE TIN |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 15W |
| Max Power Dissipation | 25W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | Adjustable |
| Max Output Current | 1.44A |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 1.6mA |
| Control Features | Frequency Control |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 66kHz~132kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 83 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 66.5% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.35mm |
| Length | 9.78mm |
| Width | 6.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TOP243PN Overview
It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .You can get it in AC/DC power converter Tube .This AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.This AC DC converter employs SWITCHING REGULATOR analog IC type.At this point, the switching frequency reaches 66kHz~132kHz .There have been 7 terminations of this program.The ac/dc converter has 7 pins.In this ac-dc converter, there are 8 pins.There are no problem mounting the ac dc converters by Through Hole .A member of the TOPSwitch?-GX manufacturer family, it has the following characteristics.There are 1 outputs to be run.There are a ac to dc conversions included in Switching Regulator or Controllers .There is 12V voltage output from it.You can read the standard of REACH SVHC : No SVHC .The AC to DC converter can be powered from the input voltage under 265V .An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.The minimum supply voltage across the converter is 85V .It is possible to supply 265V voltage across the converter.Input voltage (AC) should be below 265V .The output it is configured with uses Adjustable .
TOP243PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 66kHz~132kHz
With 7 pins
Output Type : Adjustable
TOP243PN Applications
There are a lot of Power Integrations TOP243PN AC DC Converters applications.
- ZigBee
- Air conditioners
- Power Adaptors
- Adapter for ADSL
- Lighting controls
- Standby power supplies for IR
- PDAs
- White goods
- AC/DC Adaptors/Chargers for Cordless Phone
- Battery chargers for mobile devices with touchpad display
