TOP244PN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| Series | TOPSwitch®-GX |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 28W |
| Max Power Dissipation | 28W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 132kHz |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Output Type | Adjustable |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 1.6mA |
| Output Current | 2.16A |
| Control Features | Frequency Control |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 66kHz~132kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 83 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 66.5% |
| Output Isolation | Isolated |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 3.62mm |
| Length | 9.575mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TOP244PN Overview
This ac to dc converter is included in the package 8-DIP (0.300, 7.62mm), 7 Leads .The ac dc converter is available in Tube case.Through Hole is mounted in the way of this AC/DC converter.It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.An analog IC of type SWITCHING REGULATOR is employed in this AC DC converter.At this point, the switching frequency reaches 66kHz~132kHz .There are a total of 7 terminations.Approximately 8 pins are present on the ac/dc converter.There are 8 pins in total.It belongs to a manufacturer family of TOPSwitch?-GX .A total of 1 outputs need to be run.Switching Regulator or Controllers includes the ac to dc conversions.Current output is set to 2.16A .There is 700V voltage output from it.This power AC DC is capable of reaching high efficiency when operating at a frequency of 132kHz .Here is the standard for REACH SVHC : No SVHC .The AC to DC converter can be powered under 265V voltage.An input voltage of less than 85V V is required to operate the AC to DC inverter.This converter requires a minimum supply voltage of 85V volts.There is a maximum supply voltage of 265V across the converter.The AC to DC power converter's input voltage (AC) should be below 265V .It is configured with Adjustable as the output.
TOP244PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 66kHz~132kHz
With 8 pins
Output Current at 2.16A
Output Type : Adjustable
TOP244PN Applications
There are a lot of Power Integrations TOP244PN AC DC Converters applications.
- Air conditioners
- Handheld/Battery-Powered Systems
- Auxiliary Power Supplies
- Low-Voltage I/O System Power
- Dimmers
- Appliance Power Supplies
- RCC SMPS
- Power Adaptors
- Smartphones
- Industrial controls
