Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm), 7 Leads |
Surface Mount |
NO |
Number of Pins |
7 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2005 |
Series |
TOPSwitch®-GX |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Terminal Finish |
PURE MATTE TIN |
Subcategory |
Switching Regulator or Controllers |
Power Rating |
26W |
Max Power Dissipation |
34W |
Technology |
CMOS |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Pin Count |
8 |
Number of Outputs |
1 |
Output Voltage |
12V |
Output Type |
Adjustable |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
2.2mA |
Control Features |
Frequency Control |
Topology |
Flyback |
Min Input Voltage |
85V |
Control Mode |
VOLTAGE-MODE |
Output Current-Max |
4.32A |
Frequency - Switching |
66kHz~132kHz |
Max Input Voltage |
265V |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Temperature, Over Voltage |
Max Duty Cycle |
83 % |
Max Supply Voltage (AC) |
265V |
Duty Cycle |
66.5% |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Min Supply Voltage (AC) |
85V |
Height Seated (Max) |
3.62mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
TOP246PN Overview
In the 8-DIP (0.300, 7.62mm), 7 Leads package, the ac to dc converter is embedded.Tube case is available for the ac dc converter.The AC/DC converter is mounted in the way of Through Hole .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.When the switching frequency reaches 66kHz~132kHz , the process is complete.In total, there are 7 terminations.It contains 7 pins.There are 8 pins in total.It belongs to the family of TOPSwitch?-GX manufacturers.In this AC to DC transformer, there are 1 outputs to run.There are a ac to dc conversions included in Switching Regulator or Controllers .There is 12V voltage output from it.It is possible to supply the ac to dc inverter with a maximum current of 4.32A .Here is the standard for REACH SVHC : No SVHC .The AC to DC converter can be powered from the input voltage under 265V .The AC to DC inverter may be operated with an input voltage less than 85V volts.A minimum voltage of 85V is required across the converter.The maximum supply voltage across the converter is 265V .It is recommended to keep the voltage (AC) that can be applied to the AC to DC power converter below 265V .It is configured with Adjustable as the output.
TOP246PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 66kHz~132kHz
With 7 pins
Output Type : Adjustable
TOP246PN Applications
There are a lot of Power Integrations TOP246PN AC DC Converters applications.
- Wall switches
- Home appliances
- Low-Voltage I/O System Power
- Standby power supplies for VCR
- MPS parts
- Lighting controls
- ZigBee
- Battery chargers for smart phones
- White goods
- Adapter/Charger for Cell