TOP252MN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 10-SDIP (0.300, 7.62mm), 9 Leads |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2002 |
| Series | TOPSwitch®-HX |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Termination | Through Hole |
| Terminal Finish | Pure Matte Tin (Sn) |
| Power (Watts) | 15W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 21W |
| Max Power Dissipation | 21W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Frequency | 66kHz |
| JESD-30 Code | R-PDIP-T9 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Max Output Current | 460mA |
| Max Supply Voltage | 265V |
| Min Supply Voltage | 85V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Power Dissipation | 6W |
| Output Current | 680mA |
| Max Output Voltage | 700V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 78% |
| Output Isolation | Isolated |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TOP252MN Overview
This ac to dc converter is embedded in package 10-SDIP (0.300, 7.62mm), 9 Leads .In Tube AC/DC power converter, it is available.Through Hole is mounted in the way of this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.ANALOG CIRCUIT analog ICs are employed in this AC DC converter.There are a total of 9 terminations.Approximately 10 pins are present on the ac/dc converter.There are no problem mounting the ac dc converters by Through Hole .The AC to DC converter belongs to the manufacturer family of TOPSwitch?-HX .There are 1 outputs to be run.The following ac to dc conversions are contained in Switching Regulator or Controllers .It has been set to 680mA for the output current.The voltage output by this AC/DC converter is 700V .When operating at a frequency of 66kHz , AC to DC converter is capable of reaching high efficiency.This is the standard of REACH SVHC : No SVHC .The AC to DC converter input voltage can be powered under 265V .A minimum voltage supply across the converter is 85V .It is possible to supply 265V voltage across the converter.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .The AC to DC power supply is capable of operating with a minimum supply voltage of 85V volts.
TOP252MN Features
Packaged with 10-SDIP (0.300, 7.62mm), 9 Leads
With 10 pins
Output Current at 680mA
TOP252MN Applications
There are a lot of Power Integrations TOP252MN AC DC Converters applications.
- 3.3V power supplies
- Battery Chargers
- Wireless System
- Tablets
- Consumer electronics
- Battery chargers for smart phones
- Dimmers
- Utility meters
- Standby Power Supplies
- Cleaners
