TOP252PN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | TOPSwitch®-HX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Termination | Through Hole |
| Terminal Finish | PURE MATTE TIN |
| Additional Feature | SEATED_HT CALCULATED |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 21W |
| Max Power Dissipation | 21W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 66kHz |
| JESD-30 Code | R-PDIP-T7 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Max Output Current | 460mA |
| Max Supply Voltage | 9V |
| Min Supply Voltage | -300mV |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Power Dissipation | 6W |
| Output Current | 680mA |
| Output Power | 15W |
| Max Output Voltage | 700V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 78 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 78% |
| Output Isolation | Isolated |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TOP252PN Overview
8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.In Tube case, the ac dc converter is available.As you can see, this AC/DC converter is mounted in the way of Through Hole .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.ANALOG CIRCUIT analog ICs are employed in this AC DC converter.It has a total of 7 terminations.It contains 8 pins.The ac dc converters is suitable for mounting by Through Hole .It belongs to the family of TOPSwitch?-HX manufacturers.There are 1 outputs to be processed.Switching Regulator or Controllers includes the ac to dc conversions.It has been set to 680mA for the output current.There is 700V voltage output from it.When operating at a frequency of 66kHz , AC to DC converter is capable of reaching high efficiency.SVHC for REACH can be found in the standard No SVHC .There is 15W output power generated by a coverter.Also, SEATED_HT CALCULATED can be found using this ACDC converter.In order for the converter to function properly, the supply voltage must be at least 85V .A maximum voltage of 265V can be applied across the converter.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .A minimum supply voltage of -300mV is sufficient for it to operate.
TOP252PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins
Output Current at 680mA
TOP252PN Applications
There are a lot of Power Integrations TOP252PN AC DC Converters applications.
- Networking
- Low power ac?dc Adapters for Chargers
- AC/DC LED Driver applications
- AC--DC Adapter
- AC?DC USB chargers for Cameras
- Z-Wave
- AC?DC USB chargers for Cell Phones
- Portable audio
- Appliance Power Supplies
- Replaces linear transformers
